saw not cutting straight???

[stewie]

My jonsered 630 super has started cutting at an angle no matter how much i try to keep it straight!! Any ideas why??

[skyhuck]

Chain blunt on one side or uneven sharpening.

[predator]

blunt cutters on one side of chain also check your bar it may require dressing up square again

[Mark Bolam]

Heavy handed sharpening on one side (most of us take off more on one side naturally), or bar rail worn thinner on one side would be my guess.

 

That's £460 please mate.

I can lose the VAT for cash.

 

Shall I PM my Nigerian bank details?

 

 

Sent from my iPhone using Arbtalk

[Rich2484]

Bent bar.

 

Cutters short or blunt on one side.

 

Depth gauges not right.

 

Missing cutters on one side.

[SamWhiting12]

Heavy handed sharpening on one side (most of us take off more on one side naturally), or bar rail worn thinner on one side would be my guess.

 

That's £460 please mate.

I can lose the VAT for cash.

 

Shall I PM my Nigerian bank details?

 

 

Sent from my iPhone using Arbtalk

 

:lol:

[spudulike]

It is usually a sign that the rails on the bar have splayed open and may have even worn one on one side.

 

Take the bar off, get it in a vice and put a straight edge across the rails and see how square they are, also check how tight the chainn is being held in the rails - there should not be to much side to side movement of the chain in the bar!

 

If the bar is a bit buggered, it is common for the cutters on one side of the chain to wear more than the other.

[Paul Cleaver]

all above - that's all it could be

[arniecardigan]

Has one of your arms shrunk??

[tarzan]

Make shaw you fill up the chain oil when you put fuel in because it makes the saw toe heavy. 😗😃😄😱😂,😈😈🙈🙉🙊