sheds/dens

[ArthurBottlesworth]

When I had puppies couple of years ago put them in old kennel in garden

They wrte back in house before me

 

Replaced uprights and bottom twofeet of boarding ......

Also made new doors and sleping box

 

When it rained had to replace roof and roof timbers

 

Only middle two feet original

Think new kennel would have been in order

 

Moral MEASURE TWICE CUT ONCE

[silky fox]

Well.....it's certainly very colourful:)

[Big J]

This is my sawmill shed, constructed last October. 12x12 posts, 12x9 main beams, overall dimensions 40x20ft. It faces the prevailing wind and moves not one millimetre in gale force winds.

 

 

This is my office, constructed just after using the spare roof sheets from the barn. Tongue and groove construction (done here with the four side planer), insulated and clad in poplar.

 

 

And finally, this is my log shed at home. All oak constructed, and despite holding 22 cubic metres, it's not big enough!

 

[aspenarb]

I built this lot 30 years ago before all the revised planning laws. It was just fields with nothing else when I bought it. ( the good old days ) Two massive ex WD nissan huts and dozens of smaller sheds and shipping containers.

 

https://maps.google.co.uk/maps?q=gu32be&ie=UTF-8&ei=0m0lU7HnNIbPhAfXkoG4DQ&ved=0CAkQ_AUoAQ

 

Bob

Edited March 16, 2014 by aspenarb

[Stompy]

Built this for the owners of my workshop space a couple of years ago. Cedar roof shingles and waney edged Larch cladding...... Did it in the middle of winter, couldn't feel my hands for days

 

 

 

And a complete barn re frame and clad..... 22000 paslode pins went into this

 

 

[Graham w]

i still havent finished my shed that was started back in December

[Big J]

That's stunning Graham

[muttley9050]

This is my sawmill shed, constructed last October. 12x12 posts, 12x9 main beams, overall dimensions 40x20ft. It faces the prevailing wind and moves not one millimetre in gale force winds.

 

 

This is my office, constructed just after using the spare roof sheets from the barn. Tongue and groove construction (done here with the four side planer),

 

Forgive me if I got the wrong end of the stick, but how do you easily go about tongue and grooving waney edge?

 

Stompy and Graham, top work.

[Big J]

Forgive me if I got the wrong end of the stick, but how do you easily go about tongue and grooving waney edge?

 

It's tongue and groove underneath. The walls were prefabricated and screwed together. It's 6mm ply on the inside, 25mm insulation, 32mm tongue and groove then rain screen cladding.

 

Here is a photo of it without cladding:

 

[delabodge]

great pics guys,,,big j, Looks very cosy,,,lol,,,