the 'todays job' thread

[MattyF]

Seems this local school found a cheaper quote than ours...

 

Ty

 

 

Nice ....... 👎🏻They have got them all roughly the same height I'll give them that.

[Peter]

Bit if a tickle on an oak with Inonotus and Gano.

[Guss109]

When does the helicopter land?

 

 

😂 was going more for the runway look

[carlos]

No beast tree but nice and awkward ,a Wind blown hung up Corsican with a nice SRT anchor point up the shot beech next to it.

Used another Corsican behind to secure an anchor line and wind some tension up on the lowering device once the top was dismantled the last bit was cut free then lowered the stem down with a felling cut swung it all away from the building , all worked a treat.

[ATTACH]200075[/ATTACH][ATTACH]200076[/ATTACH]

 

looks like you picked the dodgiest tree in the whole woodland to anchor off sounds like a nice job though.

[Will Heal]

Reduced 5 oak and one ash tree, 4 were half over a barn with an oil tank under 2 and a pallet of roof tiles under one for good measure!

[Ian Flatters]

Nothing serious today. I went up the tree with one of my apprentices this morning to work on his limb walking, reducing end weight and pruning cuts. I don't think it will be long before i don't have to do much.

 

Sorry about the before and after being from different positions.

[David Humphries]

Nice set up and work Ian

 

 

 

.

[john p]

Aspen reduction and a bridge with 2 ton limit, taking a tracked chipper next time!

[john p]

Photos would be good

[hamdogg]

Ash tree dismantle for the church today at side of the road