the 'todays job' thread

[Mick Dempsey]

No equivalency at all.

[Rough Hewn]

Big oak takedowns today.
Apologies for the length of video. The last 30 seconds are the action.

[emoji106]

[Rough Hewn]

This stick came easy.
But the other oak behind was heavily back weighted and leaning a bit backwards
Didn't have time to vid.

[emoji106][emoji106][emoji106]

[JonnyRFT]

I forgot to take a picture on today’s job as I was having too much fun playing around in the Avant but had to take this pic when I got back to my yard. I love this thing. With some weights on the back I really didn’t sweat lifting off this Oak from the trailer.

 

 

[peds]

6 hours ago, Mick Dempsey said:

 

Those fellas should be lifting with their legs, not their backs. 

Groovy looking chipper, mobile and mean. 

[Conor Wright]

Some ringing and splitting of oversize and processing the rest with mog power. The rings on the right were handled whole, those on the left were halved or even quartered then split.
Shed is 10 mtrs by 5.5 deep and full to the back wall.

[woody paul]

Replacing the odd fence posts on a post and rail fence I put up 10 years ago. Had a job getting solid bits of post out of bottom of hole so welded a large coach screw to a bit of rod with eye at top drove it through rot and into solid wood them screwed it in and pulled it out with loader.

[Husqvarna King]

Nice little 'rate my hinge' 3/4 of the way up this morning's TPO Pine deadwood.....9/10 for hinge, shame about the angled back cut. ?

[bigtreedon]

[bigtreedon]

A little one to start me off ?