Jump to content

Log in or register to remove this advert

the 'todays job' thread


WoodED

Recommended Posts

What do you reckon your capacity is compared to a single cab Tranny, Hodge?

 

We run them as they're a pretty safe bet, but I'd love to have a Landy like that!

 

It's not until you see your climber in the tree that you realise the scale of it. Subby or employed?

 

 

I think it's about 4 cube, I used to have a transit LWB tipper and that could get a heck of a lot of chip in but would be way overweight. The climber is a contract climber, Ollie Bennett, very experienced and competent.

Link to comment
Share on other sites

Log in or register to remove this advert

Day 1 of a Beech removal due to Merrip. The tree had a TPO in but a 5 day notice was served and away we go. Ollie B climbing and Joe, Ste, Chris on the ground and me rigging. 3 loads of chip and we are over half way now. [ATTACH]189289[/ATTACH][ATTACH]189290[/ATTACH][ATTACH]189291[/ATTACH]

 

 

Ollie Bennett?

Link to comment
Share on other sites

Seems healthy enough so maybe not. Probably going to recommend bracing over the road and that's it.

Nice Tree,

Didn't see a problem with the tree when we did it 4 years ago just tip pruned to give clearance to building and deadwood which there was quite a lot of as it had not been touched since construction.

Tree Officer at time was quite protective of the tree as it's quite a prominent one in Dereham and Tpo/ conservation area.

I've never been a fan of bracing would preference pruning to reduce weight leverage.

Link to comment
Share on other sites

Nice Tree,

 

Didn't see a problem with the tree when we did it 4 years ago just tip pruned to give clearance to building and deadwood which there was quite a lot of as it had not been touched since construction.

 

Tree Officer at time was quite protective of the tree as it's quite a prominent one in Dereham and Tpo/ conservation area.

 

I've never been a fan of bracing would preference pruning to reduce weight leverage.

 

 

I assume the middle was already cleared out when you did it? To do the tips over the road would ruin it's shape so bracing seems the logical choice.

Link to comment
Share on other sites

ImageUploadedByArbtalk1441801696.384002.jpg.ac3c217d8ea106a609378ca9c8866a12.jpg

 

Today limited reduction, under the supervision of the tree officer, I was taking about 1m maximum just to retain its shape. (Although IMO it almost looks exactly the same... However 1/2 ton of chip and 3hrs later.

 

The goal was to inspect damage from the Christmas lights and the lightning strike area. ImageUploadedByArbtalk1441801853.881803.jpg.c1c5f41587981fad09246699c927376d.jpg

ImageUploadedByArbtalk1441801835.416644.jpg.0d26a2ee780566600f7933ab82771cef.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.