2 year old ms200t walking towards the light!!

[grantdude]

It would appear that my faithfull little money maker is wandering towards the big white light. It has had a busy life with a few knocks now and again(as they usually do). It has had a new handle fitted due to a miss timed chog down. Since that day It has never been the same. Running issues pretty much ever since . I have had into three local garden machinery type shops, who charge me £40 ish and tell me its ok and just needed a clean and a tweek. Usually works fine for a good twenty mins then back to its old tricks. starts but wont run, when it does run and then cuts out it has to be choked before starting again. gotta keep pumping the throttle or else the revs just die and cuts out. If a new carb is needed why has these 'machinery boffins' not worked it out and how m uch am I looking at for a new carb. Was thinking of using it for spares and breaking the bank for a new un! any thought?

[Mozza]

Post it to Spud on here, he'll sort it

[Gray git]

check out my ad on arb trader for a new 1 you know you want a 200 not a 201

[Stubby]

It would appear that my faithfull little money maker is wandering towards the big white light. It has had a busy life with a few knocks now and again(as they usually do). It has had a new handle fitted due to a miss timed chog down. Since that day It has never been the same. Running issues pretty much ever since . I have had into three local garden machinery type shops, who charge me £40 ish and tell me its ok and just needed a clean and a tweek. Usually works fine for a good twenty mins then back to its old tricks. starts but wont run, when it does run and then cuts out it has to be choked before starting again. gotta keep pumping the throttle or else the revs just die and cuts out. If a new carb is needed why has these 'machinery boffins' not worked it out and how m uch am I looking at for a new carb. Was thinking of using it for spares and breaking the bank for a new un! any thought?

Spud will sort it . give him a p.m.

[grantdude]

check out my ad on arb trader for a new 1 you know you want a 200 not a 201

judging from what ive read, if they are still available the 200t is the way to go!

[grantdude]

Spud will sort it . give him a p.m.

your the second person to recommend this guy. Where is he based?

[Rich Rule]

Herts

[spudulike]

your the second person to recommend this guy. Where is he based?

 

I am in North Herts and have helped out a few members with their saw woes in the past. I am not a business but know how to fix most issues with saws.

[White Noise]

Drill some holes in the exhaust it will be as good as new

[Beezy]

judging from what ive read, if they are still available the 200t is the way to go!

 

Think you'll be lucky to pick up a brand new 200t from a UK supplier mate. All long gone from my searches!