Jump to content

Log in or register to remove this advert

What Chain Oil??


Parker
 Share

Recommended Posts

Have to say, when I've used veg oil from Tescos coz I forgot the normal stuff :blushing::001_rolleyes: it ran very well in an 023 and pole saw.

 

I was told that veg oil would eventually bugger the pump up, especially if it started to wax in cold conditions. Can anyone shed any light on this?

 

Bump!

 

Anyone?

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 39
  • Created
  • Last Reply

Top Posters In This Topic

Not too sure on veg oil but if the saws run regularly and you occasionally run a little diesel through mixed with little standard oil to flush the pump it should be fine...

 

As with bio oils, keep running the saw and keep it clean...

 

I use Stihl Bio Oil and the pump on my 460 gummed up and was a bugger to dismantle and clean, I've ended up keeping it as a spare and getting a new one...

 

 

Admittedly it had been left for some time without being run, learn from my mistake ;)

Link to comment
Share on other sites

  • 3 weeks later...

Well, we've tried straight veg oil the last three days and the saws (MS180, MS 250 and 036) seem to run fine. Bars and chains are cleaner than normal, all looks excellent. Cutting green chestnut though so may be a different story on a bit of dry beech.

Link to comment
Share on other sites

The bio oil will probably be better for him as it's vegetable based and not mineral based...

 

I think him throwing up may be better than having the "runs"...

 

If he's scoffing lots of saw dust he may just be trying to "clean" his stomach...

 

 

What does he eat? If it's mainly protein they do do it from time to time with wood or grass...

Link to comment
Share on other sites

  • 4 months later...

I had 25 litres of oregon mineral bar oil and 25 lit of bio. Just finished using the bio through the winter on the processor. I thought they both performed the same flowing ok in cold weather. The bio makes a bit of a sticky mess around the cover on the bar. Bio smells nicer and probably better for your skin. I get a feeling sometimes of having little splinters in my hands but it could be a reaction to diesel and mineral oil. I dont seem to get this when working the processor. We will see in the next few weeks as the tank is getting cleaned and filled with normal oregon this morning.

Link to comment
Share on other sites

I've run veg oil exclusively for the past 12 months in saws ranging from 200t to 460.

 

I've not had any problems with pumps or excessive bar wear but have noticed that I run out of chain adjustment before I run out of cutter links. Going on this evidence then then veg oil can't be lubricating the chain pins/rivets as well as a dedicated chain oil.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.