Jump to content

Log in or register to remove this advert

45° limbs


Aaron R
 Share

Recommended Posts

Hi All

I have a job coming up for a multi stem willow that needs re pollarding (i didn't do the previous pollard). All 4 of the limbs have aprox 45° lean with minimal leaders on to climb up to anchor in  the growth at the top anchor points are not very large to anchor in either. 

How would you guys approach this job  i dont have access to a mewp either.

 

All hrlp is appreciated 

 

Thanks in advance 

Link to comment
Share on other sites

Log in or register to remove this advert

Could you use 2 anchor points to tie into 2 of the best/highest limbs? Or create a floating anchor point between 2 points that will hold you near to where you need to be? 
Hard to tell without seeing the tree though I appreciate 

  • Thanks 1
Link to comment
Share on other sites

When you say you don’t have access to a mewp do you mean the trees aren’t accessible by a mewp? If not there are no shortage of places to hire a mewp from of theres access.

 

I’ve done stacks of trees like this in the past, way back before mewps because as accessible as they are today. Sometimes there’s no other way than nipping up the button cheeks and cracking on.

 

pics would help though for sure 

  • Thanks 1
Link to comment
Share on other sites

Anchoring to regrowth is one case I think two tie in points can make sense, especially if one is lower down as a backup. I've also become a fan of the SRT redirect as you can put a sling and biner round those stems high up, multisaver also works for that DRT.

 

Or final thought, depending on how much you are taking off and what the bark is like on the old stems, sometimes the special pruning spikes can be used to good effect.

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

I've long thought an artificial central leader would be useful for spready/weak trees. Like a lighting tower boom, bit of stage truss or just ladders. Strap it to the trunk and maypole around it doing the outlying branches. 

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

1 hour ago, AHPP said:

I've long thought an artificial central leader would be useful for spready/weak trees. Like a lighting tower boom, bit of stage truss or just ladders. Strap it to the trunk and maypole around it doing the outlying branches. 

 

image.jpg

  • Like 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.