Jump to content

Log in or register to remove this advert

Converting small petrol engine to run on propane


Woodworks
 Share

Recommended Posts

Getting a bit fed up the fumes from my GSX390 Honda on processor. I have been looking at ways to improve this some of which get bonkers expensive like electric motors run of a generator. Then a chap in the local hire place says just run it on propane. Seems that its a very cheap conversion and cheaper to run. 

 

Anyone done this and what are the drawbacks?

Link to comment
Share on other sites

Log in or register to remove this advert

1 minute ago, Dan Maynard said:

Did you find a conversion kit? Might be interested if cheaper to run as I have a Honda engine chipper.

Could catch on with all these petrol chippers around.

Here you go 

WWW.GEARGB.CO.UK

LPG Kits | Honda Engines and Generators | Gear GB

 

Link to comment
Share on other sites

37 minutes ago, Woodworks said:

Here you go 

WWW.GEARGB.CO.UK

LPG Kits | Honda Engines and Generators | Gear GB

 

That's not the name of the conversion I remember. A firm called arboreater (I think @Mick Dempsey may remember better) equipped some small chippers about 15 years ago and it seemed such a good idea but never took off.

 

The thing is that a cylinder of propane weighs a lot more than a tank of the same calories of petrol.

 

Also back then the only economic size to buy was 47kg ( or a liquid draw off tank to fuel a hot air balloon, thius being the cheapest propane I'm told). Otherwise you can fill a portable tank at an autogas pump for just under 70p/litre. Thereby lies a problem, a litre of lpg only contains 70% of the calories of petrol whereas a kilo of lpg contains more calories than a kilo of petrol.

 

Once you draw off more than a few kW of power the propane freezes in the tank, this is why propane converted cars have a liquid draw off which is then vapourised by the coolant. So a 13hp air cooled engine may draw a bit much, I wonder if an exhaust heated vaporiser exists.

 

There are advantages in that the oil will stay golden, I ran a V8 LR 110  for nealy two  decades on LPG and only changed the oil at 20k mile intervals and it was still gold. A chap on a forum I belonged to sent his oil to be analysed and it was in spec at 25k miles but the detergent level had dropped and it was a bit more acid.

 

The thing I never got round to doing was increasing the compression ratio, thermal conversion efficiency is directly proportional to compression ratio and as lpg has a high octane equivalent it should pay to up the compression ratio.

 

What you are looking at is what I would like to do at home but running on natural gas and a small water cooled Honda 420cc  lawnmower engine

  • Like 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.