All Activity

That's right, the wissey isn't connected to the broads, now if I'd have asked about river moorings close to/connected the Ouse he'd have been close.

VID-20250809-WA0007.mp4

Bit of beech fun

This isn't the first time you've jumped on one of my posts with information I haven't asked for, you did the same a couple of months ago when I asked about the reverse lights not working on my van, your long winded reply was all about break lights. Try reading posts properly before you reply.

Ditch Witch will all be way over a tonne Mick. They are an altogether bigger machine than the mini skids. Cast Worky Quad and Sherpa are both good, but won’t have the flow rate to run a flail effectively. Everything is a compromise!

Like Mick says. 500i is the answer to a lot of arb questions. Even a 661 on the same bar and chain is (or at least feels) slower on smaller wood. I’m aware that might sound like bollocks because displacement is displacement but I’ve just cut about 150 tonnes of 4-40” firewood with a 500i and a 661 on the same bars so feel fairly qualified to comment. 881/3120. Forget it. No point until you’re regularly doing six foot cuts. Too much misery for not enough reward.

I don’t own a skidsteer but apart from Vermeer, I’ve heard good things about Ditch Witch. Can I ask what is resilience utility?

@Mick Dempsey @Joe Newton any anyone else who uses one/has experience of these machines: Which brand/type would you recommend? It’s for a large amount of resilience utility work, so would be for moving/stacking timber and moving brash. Key requirements would be sub 1t weight, capacity to run a grab (and maybe a mulcher in future), ideally go up ramps into my 4x4 tipper to save on additional trailer. Id be looking 2nd hand, I know you can get good finance deals but I’d rather buy good quality used, outright.

BOAT Bring Out Another Thousand Just gave up looking at them as I just wanted something small but its either trailer and launch or as said before bend over (a fortune in mooring fees). Then there's maintenance, insurance...

The really big saws aren’t necessarily quicker through that size wood, a razor sharp 572 or similar will be more use.

Have to think about tracks vs wheels, I think the wheels make less mess of grass but the chinese ones I've seen have been tracked.

UK passport database images used in facial recognition scans • The Register WWW.THEREGISTER.COM updated: Campaigners brand Home Office’s lack of transparency as ‘astonishing’ and ‘dangerous’

I dont have a before pic, but a reasonable spreading conifer with thick ivy up the main and dead right stem. Interesting as it had a big hazard beam crack on the furthest spreading left stem, I wanted to get a decent amount of weight off that before I tied in. Mostly an easy drop zone, spear cut all the rear brush as nothing important behind. The new Meteor cyl kit is working well! I had some issue with it bogging but each time the air filter was clogged and had to bang it clean. There was a very dusty dead stem but seemed to clog excessively fast. Long steep garden on this and I wouldnt have wanted to be a groundie, perhaps should have cut them smaller! Cutting the low stump was exhausting at the end. Jobs like this I would like a 3120XP as it should be 50% quicker cutting the big bits.

Wordle 1,512 4/6 ⬜🟩⬜🟨⬜ ⬜🟩🟩⬜⬜ ⬜🟩🟩⬜🟨 🟩🟩🟩🟩🟩

Wordle 1,512 6/6 ⬜🟨⬜⬜⬜ 🟨⬜🟨⬜🟨 🟨🟩🟨🟩⬜ 🟨🟩⬜🟩🟨 ⬜🟩🟩🟩🟩 🟩🟩🟩🟩🟩 Bit of a cockup on line 4.

A belated morning everyone, stay safe and love what you do

@Joe Newton ideally it would need to be under 1000kg weight, so in theory it could be transported in the back of a tipper-hence the microbull or similar thoughts. I’m guessing Toro Or Vermeer would be somewhere top of the list?

This week’s job has been trying to diligently tie off all the little fiddle-fuxk decisions on the winch that I’ve been putting off for months. Got some final answers from my machinist on how much clearance he wants designed in for certain ops etc (I know - dream client!) so no excuses to not get the bits my end done. A few more (tens of) hours of CAD and then buy a piece of aluminum the size of a phone book and commit. IMG_5801.MOV

Good Morning Everyone.

*plough See.

Assuming not a bot, what equipment do you have? Plowing the land suggests a tractor at least which might be able to pull the roots up / dig them out

Posted in this "JOKES" thread 12 Aug 2022 BBC News item 9 Aug 2025 Link to article :- 'I was conned out of £3,500 by internet catfish Kerry Gray' WWW.BBC.CO.UK Peter says he feared for his safety and still has trust issues after his ordeal.

Wordle 1,512 4/6 ⬛⬛🟨⬛🟨 🟨⬛🟨⬛🟨 🟩🟩🟩⬛⬛ 🟩🟩🟩🟩🟩