Jump to content

Log in or register to remove this advert

Dan Maynard

Veteran Member
 View Profile  See their activity

  • Posts

    4,847

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by Dan Maynard

  1. Dan Maynard
    I agree you'll need a decent risk assessment in place, but it's not clear to me that what you're doing is work at height - hence discussion of nptc or irata is a bit null.
  2. Dan Maynard
    One problem is that you are not protected by consumer rights legislation, as you are a business - so if they have fulfilled the fine print in the contract then you have no leg to stand on. Maybe take some legal advice about whether there is a contractual case to answer, but even that is going to cost £250 an hour.
  3. Dan Maynard
    The other thread was a wind up, now this one's going a little strange....
  4. Dan Maynard
    I used to have a lot of trouble with 3kW compressors , but I think a lot of that was bad wiring in to the property so voltage low. To get round it I installed a couple of blue 16A sockets on individual 16A breakers, which is what I now also run the log splitter from. If I recall my splitter says not to use a normal 13A socket anyway.
  5. Dan Maynard
    Couple of pictures would be good, sounds like a bit of a dinosaur.
  6. Dan Maynard
    Check other posts, any other parts website is better than spectrum now as they've closed down.
  7. Dan Maynard
    I don't think failure is absolutely inevitable, splits close to the ground tend to be supported by the roots and yours is not too high up. If you can avoid pruning it you'll avoid provoking sprouting, which I think is not so attractive as the natural growth. The other thing to think about is what's going to be there in 10-15 years time, that tree will be so big you're wondering how to manage it. Small trees are cheap, why not plant another one now, do formative pruning over the next 10 years and then you can look at them both and decide what to do - maybe take one of them down.
  8. Dan Maynard
    That would be great if you could, thanks.
  9. Dan Maynard
    I've messaged you.
  10. Dan Maynard
    Think you get condensation under the tarp which is in contact with the wood. Ideally you want an air gap above the wood.
  11. Dan Maynard
    Wondering how you use them - the outside corners seem like they've seen some action but holes not really worn, are you using them srt or drt? Also I wonder if these are the bush or bearing type? My hitchclimber pulley on drt will probably be scrapped on hole wear first.
  12. Dan Maynard
    I changed my old 261 from .063 to .050, wouldn't want to go back. If you can't get a sugi bar stick with Stihl Light04 or even Oregon speedcut would be my suggestion rather than going .063.
  13. Dan Maynard
    I was born on the south coast, absolutely no hope understanding a conversation between locals with the noise of the factory.
  14. Dan Maynard
    I've been to Jedburgh quite a few times, used to have a machine in the coat hanger factory but COVID was the final nail and factory closed down couple of years ago. It's four and a half hours away though so no help to you. I do know it's surrounded by miles of rugged countryside, or pretty much the middle of nowhere.
  15. Dan Maynard
    No point, doesn't help.
  16. Dan Maynard
    That's the one.
  17. Dan Maynard
    Forestry with that 2511 again, then? 20" just under two bar lengths, fair play.
  18. Dan Maynard
    I believe husky is the same saw, yes.
  19. Dan Maynard
    How big is the left hand branch? Rather than remove it completely, may be appropriate to subordinate it, so maybe reduce it by half so that it grows much slower than the main stem. That way your funny split union gets swallowed up rather than turned into a huge rot pocket.
  20. Dan Maynard
    Might be arrested for running modern oil at 32-1 though, if they can see him through the smokescreen.
  21. Dan Maynard
    You have to give us a photo of it fitted now...
  22. Dan Maynard
    What a strange post.
  23. Dan Maynard
    Maybe people are more likely to buy a single dry log on eBay (ready to use) than a bootload of green though?
  24. Dan Maynard
    Going to create a new hollow though, isn't it?
  25. Dan Maynard
    I think you need some wrought iron bands fashioned by the local blacksmith. More seriously, can it be wedged and pegged with oak or something slow decaying? Seems like you want to avoid plastic attachments really, as plastic pollution in future years undermines the whole idea of being good for wildlife.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.