Jump to content

Log in or register to remove this advert

Paul in the woods

Veteran Member
  • Posts

    1,632
  • Joined

  • Last visited

Everything posted by Paul in the woods

  1. Looks like ash with a bad case of canker. (Often occurs if the ground is often wet).
  2. 4mm file sounds right but what saw do you have, it should tell you in the instructions? Also, as another domestic firewood cutter, I'd echo the comments about not just relying on the PPE but also concentrate on what you're doing. Chainsaw gloves for example will not do much to stop you cutting your fingers if you put them near a moving chain. They offer kickback protection. Be careful if you buy the leather gloves, they can get very slippery if they get wet. Also, if the saw is corded, watch out for the cord. I sharpened a very blunt saw for a friend and then realised they had half cut through the cord in various places.
  3. A quick google shows up Yeoman stoves, something like this is very similar: Yeoman Devon stove reviews uk WWW.WHATSTOVE.CO.UK Read reviews for the Yeoman Devon stove or post your own review on Whatstove
  4. Why? I thought the oils are one of the benefits of softwood? I thought creosote in the flu was the result of burning any wood that's too wet and/or without enough air?
  5. Wait 'till you try splitting it. The knotty stuff is some of the toughest wood I've ever tried to split! I have a similar sizes saw and it seemed to cope fine on Scots, it was running the 91VXL chain. I try not to take the depth gauges down too far if I'm logging up something big. Is your chain definitely getting blunt? I find the bar can pinch slightly in bigger wood, knocking in a plastic wedge in the top of a cut when half way through a log helps. I've found the chain can get blunt when processing ash that's been down a while, I just take a hand file with me and give it a quick sharpen every so often. I also thought full chisel chains are more prone to blunting.
  6. I wonder if you could 'deliver' 2m3 but take a cube back to get round the regs? On a more serious note, with the higher heating bills we are all going to face next winter I would think everyone's time would be better spent trying to encourage people to accept 2m3. Also keep an eye out for when the consultation starts about regulating even large loads.
  7. I just looked at your previous posts. 😉 As for the logs, I agree with others. Ash, syc, a bit of beach and other stuff. I can't see any obvious softwood. Looks like arb waste that's been left in lengths and then recently logged up. It's been down a while as some of the barks comming off. Should be fine firewood once dry and seasoned. If you split a few random logs and test the moisture then you'll know what you're dealing with. It'll dry a bit over winter if you can keep it dry and get the wind through.
  8. Your pics are on a google account so hardly anyone will be able to see them. Upload them directly here if you want people to comment. I also go on smell, ash, oak and cherry all smell fairly unique and very different to cedar. To check the moisture you need to split a log and test the center, they may be just damp on the outside. I doubt the meter is wrong, cheap pin type meters will tend to underread as they read higher the wetter the log. You can check by measuring the moisture of a small log and then drying it off indoors. Having said that I expect it's highly likely your supplier has run out of seasoned logs and has either cut some from from lenths from last winter which will not have seasoned much or even fresh wood. As said raise this with your supplier. I think you had problems last year? Is there any way you can take unseasoned logs and season them yourself?
  9. Is that the UK importers or Grillo in Italy? I would ask what's the purpose of the 20mm hole, what purpose does the 5mm clearance serve. To be honest I would have formally rejected the machine until they can come up with a proper explanation and fix.
  10. I can't speak for others but as one who has moaned about council behaviour in the past I'll just add the following. There are obviously some hard working and knowledgeable people in councils and money at the front end may be less than is required. I certainly appreciate any help and advice they give here. However, I have had to deal with various councils over the years and I'm normally met with very unhelpful people who's first responce is to lie. I'm still waiting for a responce from my highways department as to why they thought they could undermine a 60+ year old beach tree by using a JCB on my private land. Said beech tree shortly fell across the road. This is one reason why I take the comments that councils value trees with a very large pinch of salt.
  11. That's the badger, thanks. Googling it shows up: From: https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/692124/Revised_Cabinet_and_Pole_Siting_COP_Nov_16.pdf Obviously there's wiggle room with the "wherever possible" but it gives me something to start with.
  12. Perhaps not a legal mimimum distance but a recommended distance, or best practice? I saw one today that was right next to the road as there was a wall behind it so may not have been able to put it anywhere else. The poles I am concerned about have plenty of room behind them so were probably put a sensible distance from the road and the road has widenend over time.
  13. I tend to think the old "you can burn ash green" as a bit of a myth based on the fact freshly cut ash has a lower moisture content than most other trees. I've heated our house for the last few years mostly with ash and I've found it can take a while to season it. If the log still has a high moisture content it'll smoke and provide less heat , just like any other wood. If it's for personal use then yes, mix a bit in with dryer stuff. Leave it by the fire for a few days etc. If it's being sold or you have a lot to dry then getting it out in the open on a dry windy day like today does seem to dry it off.
  14. Possibly the most agreable comment of the year.
  15. I'm more worried about loosing our phone and electric. I'm wondering if an old telegraph pole is an indicator for where the edge of the road used to be before traffic widened it. Edit to add, what's this 'black stuff' you mention? Half the road is green (people have been known to mow it) and the other half is a mud.
  16. Thank you. I don't suppose you know where I can check? I could ask BTOR but I doubt I'd get an answer. I should have added this is a country lane in Devon, so rules might be the same but not applied (due partly to the fact the earth is still flat in these parts).
  17. Does anyone know if there is any rule or guidance about the distance a utility pole (wooden telegraph pole in my case) can be from the edge of a road surface? One assumes it can't be in the road but could it right next to it? Not a tree question but I thought someone might be know or where to look.
  18. I'd love to see them, we need more large (native) insects about. We have hornets about the place, love the sound of cockchafers as well. Sadly no stag beetles round here but they were fun at night. Keep wondering what it would be like with a prehistoric dragonfly about.
  19. I've not seen one but gathered they are quite big beasties.
  20. I think it's Xylocopa violacea, the violet carpenter bee. Or similar.
  21. Unless it's changed recently that will depend on what surface you're using. Plenty of permiable solutions available that don't need planning. https://www.planningportal.co.uk/info/200130/common_projects/45/paving_your_front_garden As for your problem, I assume you're in the LEZ, I doubt it will be any help at all but another reason for dropping the kerb is so you can charge an EV. Looking at the photo, I assume you down own the property bordering the road at the far right of the photo?
  22. I expect woodsure will add that to their next regs.
  23. You do need to be careful though, half an hour after lighting it a member of your household you've not seen before will be killed by a large lump of polystyrene hurled by someone wearing a large wooly mammoth costume.
  24. There's a number in the post here:

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.