Eddie@aspen

Hi, Great to hear you are going to try Aspen! The can's will go in household plastic recycling if empty. The five litres cans are made of the same plastic as milk bottles. Check our dealer map Aspen Fuel :: Home and if you don't have a dealer near you let me know who you use and I will see if they will stock Aspen fuels. Let me know how you get on all the best Eddie

Thanks, I feel popping in when I am passing might get better a response. I will keep it in mind. Please if anyone else has any ideas to help let me know. Thanks again Eddie

I think you are spot-on, education is the key as with forest and garden machinery markets. I thought I would start with you guys as I know I will get honest feedback and say it like it is! Looking forward to meeting you guys at the Arb Show next week!

Hi, Great Pictures! I think the outboard market for Aspen is one I need to look into, what do you guys think? What do you all think about what we are doing with Aspen?

Garden kit is spot on, Don't adjust or change the springs!!! Clean the carb and tank fit a new diaphragm and it will be good as new. I have spent 20 years fixing these engines.

Hi ring me on Tuesday 07568108953, email [email protected] or PM me. I am the aspen rep with over 20 years in the garden machinery trade and I will answer your questions. If aspen helps "which I am sure it will" I would like to meet you to hear how it is better for you. Eddie

No just put Aspen fuel in, it will mix with pump fuel. Please PM me or email [email protected] if you have any questions

Hi, I think the other guys have covered it! Please feel free to email [email protected] with questions if you would like. Kind regards Eddie

New dealer! Hayling Garden Machinery 33 Havant Road Hayling Island Hants PO11 0PT Phone: 02392461128 E-Mail: [email protected] Has small stock of Aspen2 please phone to check stock or say what type and size of aspen you would like them to stock!

Dealers I have contacted in the Northampton area; PA Turney The Mower Repair Shop The Mower Shop Garden Machinery Ltd PGM Peterborough Garden Machinery Oundle Spares and Repair Some of the above showed interest and I have sent them information. I will keep you posted.

Thanks for your help, I will make some call today! Thanks again and keep asking your local dealers, if they see a demand they will stock Aspen!

Who do you use in Northampton area?

Hi, I am trying to fill in gaps on our dealer map and I will work on Northampton and keep you posted.

Hi, not sure if I can join in? what can I say?

Hi Yes I was, had a great chat with the guys at W Thompson Saw services. I will be off to north Yorkshire in the next few weeks to carry on visiting all our dealers.

Hi, we are just sorting out shipping costs and then I will start contacting dealers in Northern Ireland. I will keep you all posted! Eddie

New dealer. PJS Machinery 57 Stockwell Street Leek Staffordshire ST13 6DH Tel: 01538 371375 Email: [email protected] Stocks: aspen 2 and 4

New dealer Andrews of Hindhead Portsmouth Road Hindhead Surrey GU26 6AL Tel: 01428 605544 Email: [email protected] Stocks: Aspen 2 and 4

Check out the forestry Journal Page 18 Aspen Q&A Sorry about the picture of me!

New dealer. Sandwich Mowers. Homestead Farm Woodnesborough Road Sandwich Kent CT13 0AE Tel: 01304 611000 Email: [email protected] Stocks: Aspen 2 and 4

New dealer. Goodrowes of Chichester. 6 The Hornet Chichester West Sussex PO19 7JQ Tel: 01243 784411 Stocks: Aspen 2 and 4

Hi all great news! New Aspen dealers. Simmonds Saws Streels Lane Ebernoe Northchapel Petworth GU28 9LH Stocks: Aspen 2 and 4 Tel: 01428 707 269 Simmonds Saws Ltd

Yes only if pump fuel has been used before. I am finding a very small amount of people with this problem. I believe you can retro fit an older style carb without the pump piston and have no problems. HOW TO FIT A PUMP PISTON KIT Remove the carb from the saw. Unscrew throttle butterfly Turn throttle shaft 180 degrees and remove. Drill a small hole in the brass plug on then face of the carb, then hook it out. Inside will be a brass piston with an o ring and a small spring. Remove these parts. Check for any wear in the hole the piston moves in. Remember it runs at the bottom of the hole. If you are happy the carb is useable fit a new pump piston kit. Spring in first then piston, now refit the throttle shaft and twist it round so the piston fits into the cut out on the throttle shaft. Now fit the new brass plug with the correct sized punch so the edges are flush. Refit the throttle butterfly making sure the throttle shaft is round the right way. Don't tighten the screw yet! now turn the shaft so the butterfly moves to sit nicely in the venturi and now tighten the screw. Now fit your diaphragm kit if you haven't already. Then refit the carb and retune as needed.

Running Stihl hp is better than standard oil but you still have all the bad stuff from the petrol. Did you know pump fuel is made from over 100 ingredients but Aspen is made from only 10. Pump fuel is classed as toxic and aspen is only classed harmful.