Eddy_t
-
Posts
4,383 -
Joined
-
Last visited
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Freelancers directory
Everything posted by Eddy_t
-
Not quite, the saw has a twin coil, the magnets on the throttle switch between the two coils (magnetically operated switch). This is also how each needle is powered (both do not tune simultaneously). The autotune doesn't control the ignition, if you advance the timing, it's advanced, the saw doesn't counteract the work done to the saw. The reason the timing is more advanced than previous saws is simply because R&D at husky made it aggressive to gain more power on a heavily restricted saw.
-
It's the first hole (closest to the cylinder). The old tillotson carb guides are very useful for the info. Air (when the butterfly is closed) feeds through the second hole and out the first, but at WOT fuel is drawn from all 3.
-
Unfortunately I can't compare the same set-up as stock, as I run 9t on 18", whereas the work's saws are 7t 15". Although I'm confident that even with the bigger bar, it'll piss all over them!
-
Would if I could, anyone know how to upload a video?
-
They are! Mine out cuts anything I've ran against it!
-
Dual port muffler as stock
-
I believe it does, I know mastermind and Mitch were messing with them
-
He's only a midget, anyone who's met him can tell you that! Shame about the black poplar, at that size and shape I'd assume it's a wild one (not a Lombardy), pretty rare round here!
-
I believe it's due to the strato, the fuel pools just by the L jet, so shifting to WOT the first charge is super-rich
-
I hope matty is reading this and shipping a delicatessen your way then! He hasn't sent the short block?
-
Christ! It's a slow process, I thought I'd took my time!
-
No, sorry, I haven't won the lottery yet!
-
Yup, as historically, all modded or vintage saws have been referred to me!
-
Buxtons will not work on a muffler modded saw
-
Yes, just stick a new muffler on before sending it off
-
Are you local to them then?
-
It's good Jon, but I'm not using the saw much currently, someone at work complained about noise
-
Actually, all joking aside, the husky bar will improve the saw! Husky runs a narrower gauge chain, which is lighter and requires less power to run. Arguably he could run a narrow kerf bar and chain, but they're harder to find in the UK, assuming wyk is in Ireland rather than the USA currently.
-
He did, it just has a different paint scheme
-
How is it, the engine, carb and av system is already husky
-
I haven't heard many positives about walkerised saws, some have very mild porting, some muffler mods, some just a sticker! May be worth sending it to spud to take a look
-
What if you have a monster tree to fell?
-
Stihl isn't logical and doesn't release models in one area at once, which is very un-German
-
That is true, but only Germany, Spain and Canada have the 193t!? I was informed by Stihl that they only get the IPL on mediacat 2 months before release!
