Jump to content

Log in or register to remove this advert

slim reaper

Member
 View Profile  See their activity

  • Posts

    484

  • Joined

  • Last visited

 Content Type 

Everything posted by slim reaper

  1. slim reaper
    I thinks you may be struggling with a 5kw stove, I have one of the larger 5kw stove which will take a 395mm log and even my 8kw clearview will just take a 420mm long one. If you have your stove on an outside wall or have floorboards with space underneath I would consider a larger output stove with a direct air supply.
  2. slim reaper
    Is your flue 5” to be looking for a 5kw stove?
  3. slim reaper
    The main difference between varying stove outputs is the size of the stove and the amount of fuel you can get on it so if you want more heat you have to go bigger. You may see small stoves with larger outputs but it's all smoke and mirrors . A fire opening should be built to regs with no flammable material hidden behind cement boards so that if anyone comes along in the future they can fill the available space to the stove manufacturers specs.
  4. slim reaper
    Thanks neiln its a Purevision Pv5W and is only there until I can find another Clearview vision 500 as the former is a bit contemporary for a 17th Century fireplace.
  5. slim reaper
    .
  6. slim reaper
    Fitting a stove with a 5” collar to a 6” flue using a 5” to 6” increasing adaptor is perfectly acceptable and as said leaves ones options open further down the road. I have the same setup on one of my stoves. Increaser adapter (5 - 6 inch) matt black : 6 inch (150mm) Matt Connecting Pipe DIRECTFLUES.CO.UK Increaser adapter (5 - 6 inch) matt black 6 inch (150mm) Matt Connecting Pipe...
  7. slim reaper
    Stovax have an instructional vid on lighting if you haven't seen it
  8. slim reaper
    Dura flue, and get 904 . Its also bidirectional so cant get it the wrong way up
  9. slim reaper
    If you leave sawdust and oil mix in the burner for long enough you may save on matches🤣
  10. slim reaper
    Whats the horizontal distance from the flue to window wall. Your cowl it a terrible style and could cause problems
  11. slim reaper
    Definitely not a villager, but looks very Efel like
  12. slim reaper
    Is that a factory setup, looks more like a mod to hold a broken flue collar on
  13. slim reaper
    What size and type of construction is your existing flue
  14. slim reaper
    Best to seal between joints with fibreglass rope which allows for expansion rather than filling with fire cement which invariably cracks.
  15. slim reaper
    A Euro adaptor goes from 134mm to 150mm
  16. slim reaper
    Something to bear in mind in future when replacing door seals beside diameter , there are different degrees of hardness which dictates how much they compress
  17. slim reaper
    Have you checked the gauge is accurate by taking the oven temperature with something like an ir thermometer which is a handy bit of kit to have anyway. If gauges is accurate there maybe a diverter flap thats stuck or haven't operated yet
  18. slim reaper
    Have a look at the door group of jotul F145
  19. slim reaper
    This with the aid of a match is all I light my stoves with and place larger logs on top
  20. slim reaper
    Seems a strange one by Burley, all they need do is give a temperature range.
  21. slim reaper
    I've got clearview ones on my stoves and when I check with a Fluke IR thermometer they are well out
  22. slim reaper
    I can't remember which cooker it was but years ago one had a round hotplate that could be removed and a wok dropped into the hole, I think they sold the wok as well.
  23. slim reaper
    Plates remain on the stove and cook on top of them
  24. slim reaper
    If the stoves been installed properly the flue should be fully supported by a hanger in the roof timbers as the stove shouldn't be bearing any weight.It would be straightforward to swing the flue 180° but you would need to check that in doing so, the straight between the offset angles didn't fall foul of the 3x diameter rule from the ceiling
  25. slim reaper
    If you intend complying with building regs then your not allowed to use flexible flue in anything other than lining an existing masonry chimney.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept