Jump to content

Log in or register to remove this advert

Tony Mac

Member
  • Posts

    29
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Tony Mac's Achievements

Apprentice

Apprentice (3/14)

  • One Month Later
  • Week One Done
  • Reacting Well Rare
  • Collaborator
  • First Post

Recent Badges

  1. You've forced to me to revise my mental picture of you!
  2. Thinking of changing my forum name to Waxy Residue ๐Ÿค”
  3. You stole the words right out of my mouth! I'm all for paraffin wax evaporating into the ether (as is my scientific understanding) but mini babybel red wax all over my grate?! Surely not!
  4. You said get the ones I liked! It's YOUR fault! ๐Ÿ˜‰
  5. I've bought these. (Cue everyone saying 'no, you shouldn't have bought THOSE ones....!' ๐Ÿ˜‚
  6. Well, I don't know which ones I like, as I've never used them! ๐Ÿ˜œ
  7. I think it's because after a year of just using my instincts on this stove, I've finally found out about some of its features and how it works (thanks to posters on here I should add), so now I'm trying to do things 'properly'. I've never used firelighters before, I've just been screwing up newspaper and lighting that, but free newspapers are getting harder to find, so thought I should switch to firelighters... and here we are!
  8. Ahh! Thanks for clarifying that for me! ๐Ÿ‘
  9. I must say I never knew this is what happened! Shocking (and depressing) info.
  10. Do you mean milk carton? In any case.... ๐Ÿ˜ณ
  11. Can anyone recommend a good brand of firelighters to use with a log burner? I've seen some of them are coated in wax which makes me think they will leave a waxy residue behind. Any suggestions of good value, effective, firelighters appreciated!
  12. Thanks for your reply openspaceman! Thanks to your advice I have found that the ash pan is not sealing properly. The handle to open and close it is stiff and I'm not able to open and close it effectively. This is another issue I now need to solve!
  13. Hello. Getting to grips with an old Scan Andersen wood burner. I've successfully replaced the door rope seal, but researching this has lead me to more questions! One thing I'm not sure of is how the ignition air vent works. I don't know how to let more air in/restrict air flow. The manual I found says to 'open' the ignition vent until the wood is burning well. But which position is open and which is closed?! The manual doesn't say and the diagram (pic attached just gives a double sided arrow! I've tried turning it different ways once I've started a fire but haven't noticed much difference to be honest! I'm sure I'm being very thick but would appreciate your opinion! Pics of the air vent knob and manual attached! With air vent pics I've taken, one pic shows the knob turned so that the opening is at the top and the other pic shows the opening at the bottom. Thanks in advance! Tony

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK. ย 
If you're just starting out and you need business, equipment, tech or training support you're in the right place. ย If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,ย ย then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

ร—
ร—
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.