doobin
-
Posts
5,842 -
Joined
-
Last visited
-
Days Won
16
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Calendar
Freelancers directory
Everything posted by doobin
-
They’re still available. I really liked mine, very ergonomic, but with two crankshafts on two different saws wearing in no time for no reason I’ve lost faith in them. I’m growing to like the echo cs501sx. It’s a right little ripper, but the ms241 is SO much more ergonomic. The fuel caps, the felling lines, the captive bar nuts and the anti vibe (especially the anti vibe) are all much better on the stihl than the echo. the power to weight ratio for both saws is unmatched. Nothing else comes close.
-
Not many motors out there have the guts to accelarate out of a snake. First thing to do is drop it into fourth, add some engine braking.
-
There’s a bloke near me. Can’t remember his name but it might come to me yet
-
It was 'Toguard' brand off eBay.
-
A reversing camera is a gamechanger. I've just this month fitted dashcams to all my vehicles. I don't bother wiring the reverse camera into the reverse light, you can press a button to cycle through views so when trying to hitch up set it to rear only and it displays the view whilst you aim and shunt if needed. Should have done it years ago. I've been unhitching the trailer on my own in places I'd never dream of as it's so easy to get back on it.
-
Don't be tempted by anything else cheaper. I tried freehand, freehand on CBN wheels (much easier but still hard to repeat easily especially with smaller sizes), a fiendishly complicated jig for a Tormek (reasonable but by God slow and very fiddly to set up) and a 'top of the range' Drill Doctor. That was total wank. You can't hold a 4mm bit in a plastic universal 3-13mm collet, stick it in a plastic holder and expect it to split the point accuractly. Slop like a dick in a top hat, in engineering terms. It also used a diamond wheel, which is totally unsuitable for grinding steel. The Chinky one uses standard E25 series endmill collets, much like the very expensive and well regarded Darex machines.
-
Drill Bits Sharpener Grinder Drill Grinding MachineMR-13D Sharpen Machine WWW.EBAY.CO.UK MR-13D Drill Bits Sharpener. 【DURABLE STRUCTURE】- Sharpening grinder machine owns a reasonable structure... The difference between this and the cheaper B or C models is that this will split the point and thin the web- additional hole machine in the top for this function. About a minute to put a near enough factory point on a bust drill once you get the hang of it.
-
Nah, I like their main product, I just wish they employed someone who actually knew one end of a saw from the other.
-
Basic chains- great value for money. Use them all the time and recommend them to all. However... 3/8 picco full chisel- total waste of time and effort. Moronic. Have they no understanding of the principle of a picco chain? Putting full size cutters on a 1.3mm chain negates the point of running a picco chain. Same thing to a point with 1.1mm picco chain- might as well run 1.3mm if you have 1.3mm size cutter on it. Bio chain oil- I think I'd be better off with water, honestly. I'm about to pour the last three cans on the fire and refill with normal stuff from Rye Oils.
-
Can't find a Chinky machine with CBN, but here are some replacement wheels: CBN wheels WWW.CHAINSAW-SHARPENING.COM CBN wheels for chainsaw sharpening I've had stuff off these guys in the past for the 8" bench grinder. It will blow your mind the edge CBN puts on stuff, with barely any heat.
-
It’s a game changer. I have a Chinese drill sharpener with a cbn wheel. It’s incredibly accurate for £280, perfect angles, relief and damn good point splitting/web thinning too. All adjustable if you know what you’re trying to achieve which is nice. Maybe they do similar for chainsaw? I’ll have a look later.
-
No need for coolant on a cbn wheel.
-
Someone needs to bring out a grinder with a cbn wheel. If it exists, use that. Overheating solved.
-
I’d go Chinese and add something like Lucas oil stabiliser if you suspect oil starvation to be the cause. I’d be pointing the finger at lack of maintenance first however.
-
Trouble is the trolleys are usually next to the cashpoint. They get funny when you start heading towards them with a JCB.
-
Thats's harsh and not usually the case mate. Most often it's third, behind the horse and then the dog...
-
Didn’t think he would sell archer. They are shite in my experience. or have they improved considerably? could be 1.6mm links in a 1.5mm slot
-
Just treated myself, couldn’t resist. Same colours and styling as my beloved XR125 from my learner days. to me it’s everything a bike should be. Simple, air cooled, reliable, capable of going on or off road and with that unique big single torque that puts a grin on your face every time you open it up in third at thirty and it just goes. God I’ve missed having a Honda.
-
Stump grinder would trash the wall also. You need a sharp digging bar and some willpower.
-
A decent 'dinky lithium jump pack' such as Noco GB70 will start a 3 litre diesel from stone cold flat. Starting your processor ten times a day would barely move the needle. I'd really recommend that you go down that route, as the first time you wake to having left the lights on in your truck you will be so greatful that it's behind the seat! I really rate mine.
-
Yes they will work fine on same bar and sprocket. It’s personal preference really but for ringing up in the yard out of the dirt on a big saw id have full chisel. Can’t see it makes much difference hardwood v softwood, what will have more effect there is how far down you take the rakers.
-
Update on mine- back from Stihl, repaired under warranty. What's interesting is the report they send with it. They pulled up the hours and start count from the M-tronic unit. 78 hours use, 172 starts. And they had the brass neck to refuse warranty upon such a low hour saw as it was two month out of 1 year until DM Saws kicked off on my behalf. Not sure what to do with it. I think I'll make sure I'm happy with the Echo and then sell the MS241.
-
Does look like it's been heavily reduced/pollarded in the past.
-
Simply won’t work.
-
It’s too much isn’t it mate! Even the rivers dried up so can’t go paddle in that either. And tides were naff for a swim on the coast today also.
