Jump to content

Log in or register to remove this advert

richy_B

Veteran Member
 View Profile  See their activity

  • Posts

    1,807

  • Joined

  • Last visited

 Content Type 

Everything posted by richy_B

  1. richy_B
    Any 4x4 or just pick ups? 3500kg is ranger (2.2 single cab is rated to 3500kg), dmax or hilux. Dont think l200 or amarok can. If it was work only I'd go with a dmax single cab 4x4.
  2. richy_B
    Hitching and unhitching a full payload 3.5t trailer to get the chipper on and off wouldn't be much fun. Ok on hard surface but could be a pig on gravel drive etc. Could work though.
  3. richy_B
    That little Schliesing 200Z looks great but at that weight most 35hp compacts are going to struggle.
  4. richy_B
    What I wouldn't like is - Tipper trailers are quite high. Putting a compact tractor and chipper on it is going to have a high CoG (not taking into consideration the front loader up and over the ladder rack). Plus you haven't got the room with tractor chipper combo centred lengthwise. All in you are going to have an accident waiting to happen if you spend much time over 50mph. I have a 1.7t mini digger and ifor 3017. It isnt great fun to tow. Just too high and I think in an emergency situation/swerve/big snake it would roll. I can barely get my AGT in the 3017 if I have a flail or winch on. I'd be miles off with a pto chipper. Sounds like you aren't taking the arisings away so why not a king/club cab. You could put a smaller tracked loader in there and have a plant/tilt bed trailer with a tracked chipper on it.
  5. richy_B
    In my humble opinion if the the seller won't provide basic information so you can check if it's legit then I'd know all I needed - run a mile. Without a serial number from the chassis, original invoice from the dealer or lots of service history from a recognised dealer who will vouch for the machine - I'd not hand over a penny.
  6. richy_B
    Would a vermeer/ditchwitch/boxer loader and a m500 be better? Could get all those in a tipping trailer.
  7. richy_B
    It will have to be a big tipping trailer to get a compact and pto chipper in. My AGT with a small chipper is over 5 metres. Bigger than any ifor tipper for example. In terms of use, on flat ground it is ok. Most will be too heavy for rough ground.
  8. richy_B
    I've not heard about this and we mainly do roadside work for LA's. I expect it will be 50mph+ roads only.
  9. richy_B
    Must have been better gearing! Pulling a 1.7t excavator on a 500kg plant trailer and you have to work the transit quite hard.
  10. richy_B
    Same as me really. I am in near constant arguement with myself about vehicles/tools/etc. Would this be better, would that be better.... Then whatever I decide I rethink it again in 3 months! My opinion is a transit tipper, a 4x4 pickup and a flatbed trailer will see you through most situations. Once you out grow these you are likely to be in 7.5t + or unimog requirement anyway.
  11. richy_B
    Mine is a 2011 and it's 6500kg. I believe it's t350 2014 onwards. That said, I'm not sure I'd want to tow 350kg behind a transit and with 115bhp not even sure you really could!
  12. richy_B
    The issue ive found is two officers can interpret it differently. I'd say 5% looks ok but if in doubt charge 20% - as long as you 'collect' the 20% and pass it to HMRC they can't give you too much grief.
  13. richy_B
    What is the reason for wanting to change between transits to a Lr tipper? Unless you specifically need 4x4 for site you are better off sticking to a transit tipper. Newish transits have 6500kg train weight, upto 2500kg towing capacity and you are generally ok with 1300-1500kg payload. New transits are 7000kg GTW.
  14. richy_B
    I like these but unless you get the 4x4 version the rear wheels are quite small. I would image they'd struggle on rougher stuff. Someone at a neighbouring unit has one (35d I think) and it hs the quick change system. It is literally seconds to change from forks to buckets.
  15. richy_B
    From - https://www.gov.uk/government/publications/vat-notice-70119-fuel-and-power/vat-notice-70119-fuel-and-power#vat-liability-of-fuel-and-power---overview
  16. richy_B
    3.2.2 Supplies deemed to be for domestic use Supplies of certain small quantities of fuel and power - known as de minimis - are always treated as being made for domestic use, even when the supply is to a business customer. These limits are explained in Sections 4 (gases), 5 (electricity), 6 (oils), and 7 (solid fuels). Supplies within the limits should be taxed at the reduced rate. You do not need a certificate to apply the reduced rate to such supplies (see paragraph 3.5 7.1.3 Firewood Ready-cut pieces of wood of a size suitable for use as fuel - such as logs, short waste ends or damaged timber - and held out for sale specifically as firewood maybe sold at the reduced rate. If not sold as firewood they are standard-rated.
  17. richy_B
    It's definitely 5% to residential customers (who intend to use it themselves). 20% to someone who is intending to resell. The grey area, or aea that I suppose is open to individual officer interpretation is 5% to 'end user'. Personally I would charge a pub 5%. How much do you sell to pubs in a year? If it's only a few £k I can't see HMRC being bothered. If you are supplying the whole of wetherspoons it might be wise to investigate further.
  18. richy_B
    A bonus based on productivity can work but based on breakages etc will be a nightmare to administer and you end up 'encouraging' dishonesty. Someone bends a bar, do they tell you and lose bonus or do they discretely slip it back in the shed....
  19. richy_B

    Hitch lock

    richy_B replied to Woodee's topic in General chat

    Where have you got it stored? If it's in a container then weld up a big ground anchor right below the axle and chain the axle to it. Repeat towards the front as well. Certainly makes it harder to access to cut. Then alarm the container as well.
  20. richy_B
    Not a recommendation but may help eliminate- I have a linde h30 which easily lifts 3 tons but it struggles on anything other than hardsurface. There is an area of rough scalpings in our depot and you have to give it some to get over some bumps/dips even when not carrying anything. I was (and still am) looking for a jcb 926 or 930. Sounds like the kind of things you'd want.
  21. richy_B
    An obvious point (but not to one of my lads!?!) Is don't try and wheel it with the ram at full height. Its really top heavy and will flatten you (as it did him!).
  22. richy_B
    I looked into lightbars and Cree seem to be good quality at a good price. I found that on ebay there are a lot of chinese knock offs though. Best go to a reputable supplier.
  23. richy_B
    Absolutely. I've done quite a bit of leaf clearing as part of any another works and completely agree. 5 large lime tree can full a builders bag(which is my I already have a debris loader). That was paid on a per tree basis though as part of pruning. I am wondering if a 'per tree' basis is best. Difficulty is going to be when you are clearing dome trees but not others - on a site boundary for example.
  24. richy_B
    Anyone done any autumn Leaf collection work? Been asked about it a few times but I cannot work out how to charge. These customers work on contract rates (usually square or linear M) so it's hard to price. I've not seen two car parks, pavements, public parks etc that are the same - in fact wildly vary. Can obviously do a day rate but I dislike this as customers are often suspicious and let's be honest, there is no incentive to work quickly. Any thoughts? Would probably be running pickup with a large trailer, 4 guys with blowers and a debris loader vacuum.
  25. richy_B
    Just had that too. I'll be stepping away from it. For me it's been a waste of time from the beginning. Never had anyone ever ask about BSL or authorised fuels.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.