Winch on chipper

[aspenarb]

TW run 150 bar and enough flow for two stator motors or two tracking motors.( not sure about other makes of chippers) That will be more than enough flow/pressure for a winch like this which makes second hand not worth looking at.

**NEW** HYDRAULIC WINCH 12V 10000 LBS POWERWINCH BRAND ----- COMPLETE SET ----- | eBay

 

Bob

[Breezeblock]

i would definatley go for hydraulic winch far better reliability and its more idiot proof

[Gray git]

TW run 150 bar and enough flow for two stator motors or two tracking motors.( not sure about other makes of chippers) That will be more than enough flow/pressure for a winch like this which makes second hand not worth looking at.

**NEW** HYDRAULIC WINCH 12V 10000 LBS POWERWINCH BRAND ----- COMPLETE SET ----- | eBay

 

Bob

 

That's a cracking deal on that especially with electric solenoid valve which could give you the opportunity to fit remote control should you want.

[simonm]

Which brand of winch does other people run?

[Watercourse management]

This is the setup on my chipper,the hydraulic winch is mounted on top of the feed intake and controlled with one spool and a three way diverter valve.

[simonm]

This is the setup on my chipper,the hydraulic winch is mounted on top of the feed intake and controlled with one spool and a three way diverter valve.

 

Bandit?

[GlobalNewark]

this is the Bandit hydraulic winch.

[simonm]

What will that pull?

[Gray git]

Quite a lot.

 

http://www.dryadarb.co.uk

[Oaklay]

We've got a electric warrior on our forst, as said previously it's fine but will get hot and loose performance if used for long periods of time. We've had it glowing hot and it's never let us down.

We have a big hydraulic winch on another machine and that will winch all day. The hydraulics do get glowing hot if used really hard though!