Show your tractors

[Charlieh]

 

My old Case and Fransgard winch in woodland near Llandovery.

 

Sent from my GT-I9505 using Arbtalk mobile app

 

Hi John which model is the fransgard? Is it on a duplex drive chain to the drum?

[John Hughes]

It is a v600 I think. Yes it has the double chain.

John

 

Sent from my GT-I9505 using Arbtalk mobile app

[John Hughes]

That should have been v600 I think.

 

Sent from my GT-I9505 using Arbtalk mobile app

[elfinwood saws]

My 3095 with Patu stroke delimber and 6m Farma crane.

[Brushcutter]

My 3095 with Patu stroke delimber and 6m Farma crane.

 

Like the stroke processor.

[difflock]

Is Minezis

(i) 70litre/min oil flow

(ii) 24 F/R

(iii) mid mount PTO

(iv) splined shaft left to connect a front PTO

(v) sub 1800 Hrs and v clean and unabused.

 

Underneath not really suitable for spraghling about up the moss(yet!).

 

I just need to sort out a 12V/6 PORT valve for a 3rd service for a log beak or timber grab to the front,

An, cough, cough, an a wee weight block for the back(cos quite a fast powerful loader)

Edited February 27, 2017 by difflock

[FJMatt]

[quote name=difflock

 

I just need to sort out a 12V/6 PORT valve for a 3rd service for a log beak or timber grab to the front,

An, cough, cough, an a wee weight block for the back(cos quite a fast powerful loader)[/quote]

 

Tidy machine.

I got a timber grab of m large for skidsteer fits on pallet forks

Got them to send a 12V 6 port valve, it's a Flowfit

[woody paul]

Just use a spare dual service on rear end if there's one.

[difflock]

There is a spare set of DA at the rear, but with the cost of hydraulic hose, and the seperate control lever and the routing of a pair of hoses, I figger a 12V switch mounted to the top of the loader joystick and a 6 port was a neater solution.

Be looking a set of forklift brackets tomorrow, and having seen the tidy "clip-on" type log-beak for a standard tractor loader forklift advertized on ebay.

It looks a very sensible idea.

cheers

mth

[woody paul]

There is a spare set of DA at the rear, but with the cost of hydraulic hose, and the seperate control lever and the routing of a pair of hoses, I figger a 12V switch mounted to the top of the loader joystick and a 6 port was a neater solution.

Be looking a set of forklift brackets tomorrow, and having seen the tidy "clip-on" type log-beak for a standard tractor loader forklift advertized on ebay.

It looks a very sensible idea.

cheers

mth

 

All you need is a set of breaker hoses less then £50 on Ebay and use lever on tractor you can not do it cheaper any other way.