entec chipper

[Gerbutt]

Defo get it, it's a bargain!

[Doobop]

Go careful it sounds like the one that was on eBay it sold then it was on eBay again in 10 days now it sounds as if it's the one being moved again

[Shane]

He says he hired it off the guy three years ago so its genuinity (?) is not in doubt, surely.

[Doobop]

Sounds like the one I saw in eBay with exactly the same bits that need doing

[jaime bray]

Hi,I run a 1995 Ente. Just be careful that some of the parts are obsolete now. And that upgrade items are needed on certain age machines.

 

I recently had the rollers on mine sharpened, new anvil, radiator acid dipped, runs like a dream now, and pulls break through like a new machine. But they aren't as cheap to bring up to scratch as you may think. Ring timberwolf hq and speak to technical department. They're really helpful.

[swinny]

What is obsolete jamie?

[hamdogg]

I loved my old entec 😀 just thought it was time to upgrade to the 150!!i thought all parts of the 150 would fit the old entecs??

[MattyF]

The older 150 and I'm guessing entec Feed roller hydraulic moters are a lot more bigger than the later 150's but are cast .. If you stick the later blade type replacing the cast roller it performs really well over a new 150 that seems to have slower infeed.

[jaime bray]

According to my machinery repair timberwolf dealer, the fly wheels,anvil, side panels, roller boss, rollers, hydraulic oil and fuel tanks.

 

If your questioning because you know otherwise, then great, you got any contact details. Cheers 👍

[timbernut]

35 is the 150 isn't it?

 

 

Essentially yes but no crappy fibre glass on the 35 and after having a head to head with a colleagues 150 the 35 just performed better.

My tw dealer told me the infeed roller pumps were non serviceable obsolete but I went to hydraulic place who put seal kit in for 50£, and ordered me replacement (charr Lynn) pump, (he said repair might not last but 6 months n still goin)