Jump to content

Log in or register to remove this advert

Recommended Posts

Log in or register to remove this advert

  • Replies 29
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted
Id sayif your groundy chokes on the capstan while trying to pull on the pull line ul be looking at some nasty shock loading?

Yea thats what i thought. It sounds like a stupid question to ask really but was just wondering if there was a way round it

Posted

Yup, letting lumps run is a must. Does it definitely need lowering? It's much safer, quicker and easier if you can step cut manageable pieces and push/chuck them down onto a brash mat in the drop zone?

 

 

Sent from my iPhone using Arbtalk

Posted
Yea good idea with the pulling line just incase. Couldnt the groundsman choke the rope on the portawrap, pull on the pull line and then lower the piece. I know a third man would be ideal but im just thinking of a scenario where this needed to be done with just the one groundsman

 

yes that is possible but NOT ideal the idea of all the lowering kit is so when that big piece goes over the groundsman can judge it falling and lower it accordinly so there is no snatch , when it snatches to a complete halt all your kit is put under stress and thats what will make the tree wobble .

 

you can also take a couple of wedges up with you , drill a hole through the rear of it and attach a piece of throw line so you dont lose them , or a small felling lever ,

Posted

yes everything must be lowered because there is a fence underneath, driveway and the owner doesnt want us dropping anything. i see what you mean about the kit being under stress and shock loaded. the stem is slightly leaning in the direction i want stuff to fall so if i take wedges up like you mentioned think i will get away with it :001_smile:

Posted

Make sure you get all your cuts right before pushing it off, a bit you didn't cut properly can peel down the stem possibly getting caught under your rope - not very pleasant at best!

Posted
Yup, letting lumps run is a must. Does it definitely need lowering? It's much safer, quicker and easier if you can step cut manageable pieces and push/chuck them down onto a brash mat in the drop zone?

 

 

Sent from my iPhone using Arbtalk

 

Agree totally with that Joe.

Also remember you reach a point at about 10' where you can't rig any more off.

 

Once mastered, blocking down is good fun, but is totally overused in my opinion.

 

 

Sent from my iPhone using Arbtalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.