Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

Hi

You got a good fire by burning the 2 x 2 so do this to get the stove up to a high temperature, dont forget its a big lump of metal to warm up and will not radiate heat till its hot.

Your logs do look to be a bit large for a small stove, try cutting them a bit smaller so there is more air round them, granny logs as known by, open your top air vent fully and close the bottom vent,if the stove is properly up to temperature as soon as you put a new dry log in it should ignite from the embers from the burnt wood if not your wood is too damp or your not up to working temperature.

Fill it as full as you can then keep topping it up as it gets half way down.When your surround has warmed up that too will radiate heat and your stove will then kick out more heat into your room.

Log in or register to remove this advert

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

Posted

All good advice & I would echo the comments about log size

My stored seasoned logs were split originally for an open fire & now I've installed a wood burner, many are too large and have had to be re split into 'granny' logs

Posted

thanks for all the advise, it seems all the heat is going stright up? im thinking of getting a self power blower fan that site on the top, anu one used one of these?

Posted
thanks for all the advise, it seems all the heat is going stright up? im thinking of getting a self power blower fan that site on the top, anu one used one of these?

 

Just type ecofan into the search on here and will find lots of threads about them and a new thread titled Vulcan fan.

Posted

That's spooky ! Seems like great minds thinking and all that :D

 

I am looking at getting a stove fan, as you typed your reply I was making a new thread about them.

Posted
thanks for all the advise, it seems all the heat is going stright up? im thinking of getting a self power blower fan that site on the top, anu one used one of these?

 

Not thinking the eco fan will help much.

Try putting the back of your hand in front of the spinning fan- you won't feel much draft. Unless mines not working properly that is. I think they are more for show

Posted

You're not supposed to feel a draught - that's the whole idea! They move a lot of air very gently so you don't really notice - not much fun sitting right in front of the average fan heater!

 

Almost everyone who uses an ecofan seems to reckon they're great - and I've come across a couple who have done proper tests to prove the difference they make. Popular on narrowboats too as the stove is usually at one end.

Posted
You're not supposed to feel a draught - that's the whole idea! They move a lot of air very gently so you don't really notice - not much fun sitting right in front of the average fan heater!

 

Almost everyone who uses an ecofan seems to reckon they're great - and I've come across a couple who have done proper tests to prove the difference they make. Popular on narrowboats too as the stove is usually at one end.

 

Do tell:001_rolleyes:

Posted
Do tell:001_rolleyes:

 

 

 

Have a look at the Ecofan web site.

 

http://www.ecofan.co.uk/

 

They do work, I will send any member here one on a sale or return basis and 90% of the fans I send out remain sold.

 

No draught, no noise and an increase in temps at head height of 4 deg C or 10 deg F. If in doubt stand on a chair in your room a couple of hours after you have got your stove going. No fan and its hot as hell up there, fan and its the same temp as head height.

 

A

Posted
Have a look at the Ecofan web site.

 

Ecofan - Find Eco fan stockists through the UK distributor

 

They do work, I will send any member here one on a sale or return basis and 90% of the fans I send out remain sold.

 

No draught, no noise and an increase in temps at head height of 4 deg C or 10 deg F. If in doubt stand on a chair in your room a couple of hours after you have got your stove going. No fan and its hot as hell up there, fan and its the same temp as head height.

 

A

 

Looks like I've got an original model. I see they have changed the design of the blades.

I couldn't get any proof of effectiveness because the page with the info. on it wouldn't open.

I will though try the head height thing.

Sounds like you are saying the air movement from the fan is enough to keep the air in the room moving enough to counteract convection currents. Let me check- purely scientific interest you understand. I'm not trying to wind you up but I like to see proof. I do though think even without the proven efficiency increase they are a good looking stovetop toy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.