Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

Next time a customer ask's why firewood is so dear I will show them this, 16 nails, staples and barb wire in a 1 mtr section, granted this was the base but there had been others further up the trunk. I gave up cutting in the end as every cut was another sharpen.

 

IMG_20121227_151233.jpg

IMG_20121227_151233.jpg.ee5ec897d1925de28b69ee8d6f658737.jpg

Log in or register to remove this advert

Posted

Ha, funny that. about two hours ago I was taking the remains of an old Ash trunk out of a hedge.

Wire clearly obvious going in one side and out the other.

 

Trying to judge it just right so I cut between the wires...

 

...then I hit a stone inside the trunk....:angryfire:

Posted

Had similar grief myself once in a big oak trunk I had been given,it was about 4ft dia with wire embedded at least 1ft inside! how long ago was that nailed on I wonder?

Posted

late father in law was cutting some beech in wood cut it down logging it up sparks flew out chain was blunt. in the end we split the trunk with wedges embedded in trunk was a 9mm bullet from a german aircraft strafed the woods as thought it was a army camp. it was in the first world war. did not do the chain much good.

Posted

fitted a new 20inch chain on mi husky first cut into a beech trunk that was 2ft dia just got about half way saw jumped chain brake kicked in

brake off started to cut again saw was vibrating stopped looked at chain there was a whole chisel missing off the chain! ripped completely off!!!!

i had hit a piece of half inch round bar which must have been used as a stake it ran about 3ft up the trunk!!!!

was not happy!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.