petrol heads-so you think your a good machine operator huh!

[pie eater pete]

Guy I worked with on HM prisons Wymot and Garth new blocks used to drop marking pins in with the back of a 21 tonne 360. For floating up slabs we used to stand in the bucket and reach down. He could literally scrape off 5 mil at a time.

[easy-lift guy]

He has mastered the apptude test. Well on his way to becoming the CEO of the company!

easy-lift guy

[Old Mill Tree Care]

I'd sack him for wasting my time / money

[Tony Croft aka hamadryad]

I'd sack him for wasting my time / money

 

I would not, I would give him a pay rise and feel glad I had a superior dude on board:001_tt2:

[chrissishrimp]

great!

[Tree Man Tom]

The little flick to get the coin onto the fork was cool, rest was pretty straight forward tbh.

[Paul Barton]

The little flick to get the coin onto the fork was cool, rest was pretty straight forward tbh.

 

Are you taking the piss or can you do that as well?! I thought it looked like he had some superior skills there but I've never driven a machine like that.

[Rich2484]

The flock onto the fork would not happen if the fork was as it should be. The tip is too sharp and would be condemned by h&S.

[Tree Man Tom]

Are you taking the piss or can you do that as well?! I thought it looked like he had some superior skills there but I've never driven a machine like that.

 

Never tried a flick like that but didnt look to hard, could do the rest. If anything its easier on a machine like that as they dont bounce around much, like a smaller forklift would.

[skyhuck]

Never tried a flick like that but didnt look to hard, could do the rest. If anything its easier on a machine like that as they dont bounce around much, like a smaller forklift would.

 

Come on then lets see your video

 

Talks cheap