Jump to content

Log in or register to remove this advert

threading the needle


dadio
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 120
  • Created
  • Last Reply

Top Posters In This Topic

dadi wouldn't call that a "stuntfell", as it was really a very straightforward notch and drop. Though he first heard the term "stuntfell" on this site and is not sure exactly what that means.

 

What made that a bit unusual was that the cut was made from the bucket at about 10-12', where the trunk was 32" diameter. The top was 65-70' tall. The bakcut was plunged, with a slight bypass of about 3" on the back strap release. This allowed the tree to move slightly towards the lay, but then stop, leaving the kerf of the lower backcut open about an inch.

Once that happened dadi knew the tree was ready to go with just a slight pull, so he could reposition the bucket for a good camera angle.

 

Threading the needle refers to a tight drop zone only. The tips of the falling tree brushed the tips of both trees to either side on the way down and brushed the shrubs across the street, without doing any damage to trees or shrubs and very little damage to the lawn, as the street took most of the impact.

 

Two pull lines were used, both slightly offset from the lay to compensate for side lean and weight. One was a static line, pretensioned with the pickup truck, with driver ready if extra pull was needed. the other was set with a redirect on a tree in the yard across the street and pulled with the skid steer in the street.

 

The wedge was used to compensate for taking a bit much off the tension side of the hinge with the plunge cut, though ot probably was not needed.

 

Anyhow, it turned out to be a pretty piece of video :thumbup1:

Link to comment
Share on other sites

I liked that one. :biggrin:

 

Once round the lawn with a fork and the job's a good 'un!

 

I'm getting fatter and I have a cherry picker, so I just need a skid steer now!

 

Was the bloke with an armful of books a busybody who'd come to tell you that you're not allowed to block the road, after you'd finished. :lol:

 

:thumbup::laugh1:

Link to comment
Share on other sites

Nice fell :thumbup:

 

 

can you re word/expand on this

The bakcut was plunged, with a slight bypass of about 3" on the back strap release. This allowed the tree to move slightly towards the lay, but then stop, leaving the kerf of the lower backcut open about an inch

 

Josh says thanks Dadio

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.