Jump to content

Log in or register to remove this advert

Emergency Tyre Change at home/on site ?


chopperpete
 Share

Recommended Posts

  • chopperpete changed the title to Emergency Tyre Change at home/on site ?

Log in or register to remove this advert

3 hours ago, Mr Bear said:

Getting the wheel off/on is the easy part.  I changed the type on my ride on mower and the problem is inflating it, you need a large shot of air to seat it.  Ended up having to take it to the local garage anyway.

Ratchet strap around tyre to push it out to rim edge. 

  • Like 2
Link to comment
Share on other sites

Or take out valve and spray a little parts cleaner  inside between tyre and rim spraying a trail over tyre onto ground, stand back and light. Tyre bead is blown into place on rim.Used this method to seat quad tyres sent through post that usually come flattened. Use all relevant safety gear/don,t try this without training etc.etc.😂

Link to comment
Share on other sites

If you are running a few vans, trailers, chippers and plant its worth kitting up to do some of your own tyre repairs/changes. Not talking about fitting new sets, just repairs and changes. Older s/h tyre machines are cheap, one below was only £250, doesn't take long to recover that when you have three guys stood there looking at a flat tyre waiting to get out of the yard.

 

  • image_zpsxibxvqry

 

These bead cheaters are also cheap and take the grief out of bead seating, about £80

 

IMG_1071.thumb.JPG.ba03058adab9d26601ff68872d6656c9.JPG

  • Like 5
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.