Jump to content

Log in or register to remove this advert

  • 0

Rot in fallen branch


Guest
 Share

Question

Good morning all,

 

just wanted opinions on sycamore tree in my garden. Large branch fell during the high winds on the weekend. Looks like there was some rot in the area that broke. Is the damaged remaining branch ok to be left as it is, or should i have it removed? I assume the rot will only get worse.

many thanks

samIMG_3613.thumb.jpeg.d0f59acad1aedb93d559401c7105fc77.jpegIMG_3619.thumb.png.ac4a2bfbea8093c57a68e449bdc107c1.pngIMG_3613.thumb.jpeg.4944123c28836c5b043a2f7b94c4fba7.jpeg

Link to comment
Share on other sites

Recommended Posts

  • 0
45 minutes ago, Samc46 said:

Good morning all,

 

just wanted opinions on sycamore tree in my garden. Large branch fell during the high winds on the weekend. Looks like there was some rot in the area that broke. Is the damaged remaining branch ok to be left as it is, or should i have it removed? I assume the rot will only get worse.

many thanks

samIMG_3613.thumb.jpeg.d0f59acad1aedb93d559401c7105fc77.jpegIMG_3619.thumb.png.ac4a2bfbea8093c57a68e449bdc107c1.pngIMG_3613.thumb.jpeg.4944123c28836c5b043a2f7b94c4fba7.jpeg

Looks like it was started by Included bark in the union .I don't think it will affect the rest of the limb . 

  • Like 1
Link to comment
Share on other sites

Log in or register to remove this advert

  • 0

Looks likk compression fork failure, very common. I'd give it a chance to put on reaction wood around teh breakage, and if I was woorried about breakage in teh meantime I'd brace the remaining section to a good adjacent stem, leave it loose to allow flexing but tight enough to catch it if it breaks.

Link to comment
Share on other sites

  • 0

Urban sycamores get bashed about because it's too big a tree for a city garden. I would guess it's been cut back hard some years ago and the narrow fork has happened because of the sprouting response to that.

 

Check for other similar narrow forks, if you don't feel confident to recognise then get someone in. 

Link to comment
Share on other sites

  • 0
14 hours ago, daltontrees said:

Looks likk compression fork failure, very common. I'd give it a chance to put on reaction wood around teh breakage, and if I was woorried about breakage in teh meantime I'd brace the remaining section to a good adjacent stem, leave it loose to allow flexing but tight enough to catch it if it breaks.

It's an ugly tree in an unsuitable location near to houses, apart from the expense I would have it out.

Link to comment
Share on other sites

  • 0
3 minutes ago, openspaceman said:

It's an ugly tree in an unsuitable location near to houses, apart from the expense I would have it out.

Each to their own. The pictures suggest that it is doing a good job of blocking intervisibility from houses across the way.

  • Like 1
Link to comment
Share on other sites

  • 0

Hi, thank you all for your responses. Much appreciated. @daltontrees is right the Trees do a good job of creating some privacy in the garden. There are actually 3 sycamores in this garden in close proximity to one another all with TPOs on them. They are approx 40ft away from the house 2 very close to each other on the right hand side. I would like to have the one in question removed if it was possible but I think it’s unlikely to be given the go ahead by council . My neighbour has had drain problems due to roots, and there is a retaining wall on her side that is being forced over due to its location on the boundary line.

 

My main concern at this point is that this branch is safe. some more photos of the damage.

 

IMG_3625.jpeg

IMG_3626.jpeg

IMG_3627.jpeg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.