Jump to content

Log in or register to remove this advert

Double climbers


AHPP
 Share

Recommended Posts

Does anyone have much experience of using double climbers on big/tricky takedowns with rigging. Is it generally more productive? If so, how much more productive? Does double the climbers double productivity? Less than double? More than double? Maybe it's slower than one climber?

 

I've done little stints, most memorably on lombardy poplars (straight up and down, repetitive tip tying). I've stayed high, clipping rigging and someone else cuts low. Saves me a lot of ascending and descending and I can keep my small saw, while the lower cutter can have a bigger saw and not have to move much with it.

 

What's it like in more normal three dimensional crowns? One or two rigging systems? Working independently or ganging up on one branch at a time with span rigs etc? Anything to note about tie in points and climbing systems?

Link to comment
Share on other sites

Log in or register to remove this advert

Done it on large spreading Beech tree reductions, two separate teams in effect working opposite sides of the tree, as said plenty of ropes in the tree though. Much easier if its cut and chuck. Also easier if both working SRT with single main rope and positioning rope, ahem.

  • Like 1
Link to comment
Share on other sites

Normally when I've had another climber on a rigging dismantle it so we can both avoid the bitch work.

 

Sounds bad but when you have plenty of unskilled labour on the ground you'll both go up and have an easy time sharing one rigging line.

 

Large reductions 2 decent climbers is a must, but they have to be at the same level as you. I won't do two day reductions by my lonesome these days. I'll bring another good climber and do it in one.

 

That said I've done the last two days riding a crane hook picking multiple small willow limbs out of a hard to reach area. It made sense to drop a climber into the pollard points and just have him cutting while I tied off the picks and rode them out. 

Link to comment
Share on other sites

Yes at times. Though it's really important that the guys in the tree work well together. Their height levels are similar and that there's a good guy on the ground (ideally overseeing the guys in the trees safety and general positions in relation to each other). Just my opinion, not and everyday thing but certainly fairly often this happens. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.