Long leg chainsaw trousers

[Gav Green Man]

Hi  does anyone have any advice for long leg chainsaw trousers. 

I'm 6ft 4, and long in the leg, 34-35 lev would be nice.

Ideally looking for a  lightweight climbing pair to prevent overheating in the summer. 

Was considering the new stihl  but at 34 inch waist are only 32 inch leg.

I find particularly when in a harness, even with high boots, trousers ride up and I fill up my boots with sawdust.

Also exposing this high risk area to the saw.

[billy_wizz]

Englebert Strauss do a good range of sizes don't know any more about them then  other than there not cheap at £130 ish a pair

[htb]

Arbortec and Pfanner do long leg trousers

[Dan Maynard]

I went Arbotec Pro for exactly this, had to get the long leg ordered in. I wouldn't like to claim lightweight exactly but I have worn them a couple of summers.

I wasn't that happy with the fit of Pfanners, ideally try them on but difficult at the moment. Stihl aren't great for length as you have to go up waist size to get longer leg.

[Dan Maynard]

Englebert Strauss do a good range of sizes don't know any more about them then  other than there not cheap at £130 ish a pair

I don't think they do a type C.

[departed]

Stein sentinel long leg. Very comfy trousers [emoji106]

[Mark Bolam]

Pfanners all day, Arborist or Gladiator in Type A.

@Rich Rule is also 6’4” and he gets on well with the long leg versions.

[Mark J]

I used to get the pfanners with the extra 7cm leg. I'm 6'2" and they were easily long enough.

Edited March 20, 2021 by Mark J

[Rich Rule]

I have been on Pfanner a since for quite a few years.  Onto my 7th pair now.

 

+7cm are great.  I am also 6’4”.

[Gav Green Man]

Thanks for all your help guys