Lifting slabs with machinery

[Graham w]

 stone vacuum lifter head. Up to 10 ton lift!

 

Heavy duty vacuum lifting devices

WWW.PRECASTMACHINERY.COM

---

Our range of products for heavy duty vacuum lifting devices to be fitted to any carrier machine. From 500 to 1.500 kg.

 

Edited December 17, 2020 by Graham w

[topchippyles]

5 minutes ago, Rough Hewn said:

How wide and how thick?

8" length 3" thickness and 6" girth 😁

Edited December 17, 2020 by topchippyles

[trigger_andy]

19 minutes ago, Rough Hewn said:

How wide and how thick?

suits you sir!  

[Stephen Blair]

54 minutes ago, Graham w said:

 stone vacuum lifter head. Up to 10 ton lift!

 

Heavy duty vacuum lifting devices

WWW.PRECASTMACHINERY.COM

---

Our range of products for heavy duty vacuum lifting devices to be fitted to any carrier machine. From 500 to 1.500 kg.

 

Thought about this Graham but didn't like the cost.

[Graham w]

2 minutes ago, Stephen Blair said:

Thought about this Graham but didn't like the cost.

we built one for the crack! reverse a compressor so that instead of pushing air it pulls i.e. vacuum. Then run the air line to a head plate with a lifting eye and a rubber seal around the outside

[Stephen Blair]

17 minutes ago, Graham w said:

we built one for the crack! reverse a compressor so that instead of pushing air it pulls i.e. vacuum. Then run the air line to a head plate with a lifting eye and a rubber seal around the outside

Well you can just adapt it for my digger please in the new year !👌

 

needing more timber for Davie so I'll be over!

[trigger_andy]

6 minutes ago, Stephen Blair said:

Well you can just adapt it for my digger please in the new year !👌

 

needing more timber for Davie so I'll be over!

Cant you just hire a couple of keen Polaks on the cheap for the day? 

[kernowstu]

Lucas Mill - Operators Club

A few idea's on here I searched lifting chains

[openspaceman]

8 hours ago, Stephen Blair said:

 

Thoughts so far are lifting tongs on a swivel/shackle.

 

 

Why not just a barrel chain with gaff hooks instead of clamp. Perhaps a shortening clutch on the ring to allow for different widths

 

[dumper]

You mean like these