Jump to content

Log in or register to remove this advert

Recommended Posts

Posted
17 minutes ago, Big J said:

Woodmizers are OK. A tidy product with excellent marketing and there some advantages to the one post head system, but accuracy of cut isn't one of them. 

 

They stuck doggedly to their design for a long time, but they are having to respond to a drop in market share by offering mills with a larger throat and a more stable design, incorporating rails and posts on both sides. 

 

I had the first Trakmet sawmill in the UK. I went out to the factory in Poland a couple of times. They are a pretty decent company to deal with and their machines are solid. Not very sophisticated and their engineering tolerances at the time were lacking a bit. They made up for that with steel. Lots of steel. 

I put 1100 hours on mine before I sold it and the guys who bought my business have added another 6-700 without issue. They are much cheaper than Woodmizers but certainly their equal. 

 

If I had the money I'd go Mebor though. That's a lovely mill.

 

I had the Trakmet, with the Logmaster LM2 prior to it and the Woodmizer LT40 before that. The Logmaster was the stand out mill being both solidly made and well engineered. 

 

Fundamentally, go for as few electrics as possible, as many hydraulics as possible and as much steel as possible. Also, as wide a band as possible. There is no substitute for power either.

Thanks for your reply. I think I read in another thread that you had the bigger tts-800? I'm assuming that was electric drive?

Was that purchased before they appointed  an agent in Hereford? 

Log in or register to remove this advert

Posted

Are logosol b1001 decent enough to mill 1 or 2 decent logs a week ? More than likely 1 or 2 a MTH though And for a first mill ( never used or seen one running in person) are they simple enough to use am a bench hand by trade so used to using machines 

Posted (edited)

Trigger my son is 15 years old and severely autistic and cannot string more than a few words together but you new that before your little outburst.Your a nasty piece of work when challenged on anything which is why i blocked you so i do not have to read some of the garbage you spout.Just showing your true colours yet again. (pathetic) 

Edited by topchippyles
  • Like 1
Posted
15 minutes ago, topchippyles said:

Trigger my son is 15 years old and severely autistic and cannot string more than a few words together but you new that before your little outburst.Your a nasty piece of work when challenged on anything which is why i blocked you so i do not have to read some of the garbage you spout.Just showing your true colours yet again. (pathetic) 

Thats a real shame Les.

 

Curious why you unblocked me then? 

Posted

Oh for ****************s Sake can we not Stop all this slagging a bit of piss take is fine but come on guys lets not **************** things up we have a cool comunity full of knowledge cant we play nice

  • Like 7
Posted
Are logosol b1001 decent enough to mill 1 or 2 decent logs a week ? More than likely 1 or 2 a MTH though And for a first mill ( never used or seen one running in person) are they simple enough to use am a bench hand by trade so used to using machines 

??????
Are you having a laugh?
The B1001 is a £10k (starting price)
Highly professional 34” bandsaw made in Sweden.
1 or 2 logs a week?????????
Try 1 or 2 decent logs an hour.
[emoji106][emoji106][emoji106]
Posted
36 minutes ago, Mark armstrong said:

Just for my own use buddy haha more than likely resaw the slabs I have too save me chugging loads off with the router others I have seen don't do as wide a cut aswell and I like the wider slabs 

Hi Mark 

I put a post up ref resawing elm a few days ago. I was doing pretty much what you are describing as a favour for a mate and to be honest we would have been just as quick to set up the router sled. Firstly it was killing the blades big time and secondly at max width the blade which was a brand new one correctly tensioned was deviating up and down in the cut, not by much but a few mm so enough to need remedial work with the router if you are after a totally flat piece. Admittedly that was only 1 piece of Elm which has been drying for about 4 years but maybe something worth thinking of. 

  • Like 2
Posted

Aye a seen that mate I have a load of elm there but all 2" so won't need resawn that it's just oak and spalted beech I would of been cutting agen lately because a coustomer who dose van conversions only wanted 18mm tops was a shame wasting over 2" of 27 year air dried stuff plus if a could manage to mill my own logs tiny amount would save paying someone 450 a day if a get the mill I will get a forklift and a little tent kiln saves messing about with shipping am not the brightest when it comes to all that crap get stressed easy so everything I need in 1 place is what am thinking 

Posted
Hi Mark 
I put a post up ref resawing elm a few days ago. I was doing pretty much what you are describing as a favour for a mate and to be honest we would have been just as quick to set up the router sled. Firstly it was killing the blades big time and secondly at max width the blade which was a brand new one correctly tensioned was deviating up and down in the cut, not by much but a few mm so enough to need remedial work with the router if you are after a totally flat piece. Admittedly that was only 1 piece of Elm which has been drying for about 4 years but maybe something worth thinking of. 


Ive resawn Two to three year oak on my Mill without a problem. I did tighten the band past the optimum setting though. Cut nice.
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.