Jump to content

Log in or register to remove this advert

Which Chainsaw for Forestry


Jamie Jones
 Share

Recommended Posts

I don't have much experience in trees as large as that and not having done domestic work, I never really ring up. On my jobs, it's only a cut every 3-4m, so a shorter bar is no impediment, and besides, my little forwarder won't pick up larger sticks anyway.
 
I'll use the example of a spruce thinning job we did in August. One of the cutters came with a 372XP (very quick cutter) to fell some fairly large spruce (100ft average, 18" DBH). He was running a 15" bar on it. He then had an issue with the saw and had to borrow an MS261 on a 15 from another cutter. His production rate actually went up when he dropped to a smaller saw.

Since they finally sorted the teething problems with the needle cage etc they are my go to saw.
261 2"dogs 18" bar 16" cutting length.
Great little ripper.
IMG_2634.jpg
[emoji106][emoji106][emoji106]
  • Like 4
Link to comment
Share on other sites

Log in or register to remove this advert

462 ... not used the 572 but picked one up.. 462 is a pretty amazing saw , I run it on an 18” I would of gone for the 572 if there was any on the shelves but was really surprised that the 462 is that good ,light and well balanced with great power.

  • Like 1
Link to comment
Share on other sites

1 hour ago, MattyF said:

462 ... not used the 572 but picked one up.. 462 is a pretty amazing saw , I run it on an 18” I would of gone for the 572 if there was any on the shelves but was really surprised that the 462 is that good ,light and well balanced with great power.

R.H. says its underpowered for a 70cc saw .  You don't find it so ?

Link to comment
Share on other sites

[emoji38]No... no way ! I’ve had 272’s 372’s 044’s 460’s and a 576 and have spent a lot of time on all of them and love this saw.. I would rather of used a 560 instead of a 70cc saw in the woods but this has changed my mind.. in my mind there are two different types of 70cc saws though.. the 440 441 and 462 372.
Then there is the 460 461 576 dolmar/Makita 7900 the later will pull a big bar better every time but then they are nearly 80cc saws and who wants a big bar in the woods? Fair enough if your on spikes on a big spar.

Link to comment
Share on other sites

2 minutes ago, MattyF said:

emoji38.pngNo... no way ! I’ve had 272’s 372’s 044’s 460’s and a 576 and have spent a lot of time on all of them and love this saw.. I would rather of used a 560 instead of a 70cc saw in the woods but this has changed my mind.. in my mind there are two different types of 70cc saws though.. the 440 441 and 462 372.
Then there is the 460 461 576 dolmar/Makita 7900 the later will pull a big bar better every time but then they are nearly 80cc saws and who wants a big bar in the woods? Fair enough if your on spikes on a big spar.

Ok . Thanks Matty . Not tried one myself and most of the revues have been positive .  Specifically R.H. says it will not pull a 25" bar . The max I put on my spud 372XP is 24" but it pulls it fine .  I suppose if the 462 is on an 18" or 20" then it would be fine .  

Link to comment
Share on other sites

Here's Scott AKA TreeMonkey, using an OE MS462CM in a cant of what appears to be poplar on a 28" bar.

 

 

If you let the saw do the work and keep your chains sharp, I think that 462 could do about anything with a 20-24" bar.

 

168465094.uYueVZeU.jpg

137564869.iMDfwK67.365.JPG

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.