Jump to content

Log in or register to remove this advert

Soft wood


richardwale
 Share

Recommended Posts

Log in or register to remove this advert

31 minutes ago, Peasgood said:

Willow and poplar are hardwood :)

Presume that one was aimed at me. Yes they are but they dont cost £60 per tonne either

 

I was just generalising there are always exceptions. The hardwoods we get in for firewood are oak, ash, beech, sycamore and birch. Softwoods we get are larch and douglas.

Link to comment
Share on other sites

34 minutes ago, Woodworks said:

Presume that one was aimed at me. Yes they are but they dont cost £60 per tonne either

 

I was just generalising there are always exceptions. The hardwoods we get in for firewood are oak, ash, beech, sycamore and birch. Softwoods we get are larch and douglas.

 

Link to comment
Share on other sites

All wood is good wood as long as its dried properly and it not treated in any way with crerosote etc.  

 

Today in the stove showroom I am burning POP,  cut and split a couple of years ago.  Burns well.   At home tonight I will be burning Willow in the main.

 

To the best of my knowledge only the fumes from man made smokeless fuels will damage a 316 grade flue liner especially if the stove is shut down for long intervals.   In that situation a higher grade of liner is used.   I am not aware of the fumes from any wood causing issues within a flue liner unless the fuel is wet,.  Then you get issues with blocked flues and chimney fires,

 

A

Edited by Alycidon
  • Like 1
Link to comment
Share on other sites

1 hour ago, Alycidon said:

To the best of my knowledge only the fumes from man made smokeless fuels will damage a 316 grade flue liner especially if the stove is shut down for long intervals.

I guess that's from the sulphur burning to sulphur dioxide and then combining with condensed water to make sulphurous acid.

1 hour ago, Alycidon said:

 

  In that situation a higher grade of liner is used.   I am not aware of the fumes from any wood causing issues within a flue liner unless the fuel is wet,.  Then you get issues with blocked flues and chimney fires,

I have seen a 316 pipe pinholed, I posted a picture here, but I'm fairly confident that was because chipboard with some sort of plastic facing was being burned. Even then the only reason for perforation was that condensation was happening so all the time the flue temperature is up above the dew point there shouldn't be a problem. I used 904 ss liner when I fitted my daughter's stove just in case,

 

The thing is that if your fire is smouldering the pyrolysis products don't get burned and pyroligneous acid (vinegary brown liquid) will condense on cold surfaces. I think softwoods won't produce much vinegar if at all. Stainless doesn't fair well in anaerobic acid conditions.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.