Jump to content

Log in or register to remove this advert

Hot, hot, hot!


Harry_L
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 20
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

So is this the MS230, that wouldn't run. ..the one where carb had been visited by "Bodger's Inc" in a former life?

 

If i were you I'd do some searching on how to tune a carb before you do much more with it, there is a real chance of damage if its running lean (and therefore hot). There are some good You Tube videos on the subject, you need the soundtrack as tuning is done by ear (or with a tacho if you have access to one).

 

bmp01

Link to comment
Share on other sites

Where would the air leak be coming from? And how do i tell if its over-revving?

 

Thanks

 

 

Sent from my iPhone using Arbtalk

 

An air leak could come from a split fuel hose or shot crank seals or a split carb boot etc etc . If it has one it will run lean which , will make it over rev and run hot and possibly eventually lean seize . You can check the RPM with a tacho . Obviously you need to know what the top limit RPM is supposed to be . .

Link to comment
Share on other sites

So is this the MS230, that wouldn't run. ..the one where carb had been visited by "Bodger's Inc" in a former life?

 

If i were you I'd do some searching on how to tune a carb before you do much more with it, there is a real chance of damage if its running lean (and therefore hot). There are some good You Tube videos on the subject, you need the soundtrack as tuning is done by ear (or with a tacho if you have access to one).

 

bmp01

 

Running weak causes more heat to be rejected into the cylinder, it doesn't affect the temperature of the exhaust gas which is maximised at full chat with over 500C at stoichiometric fuel:air ratio.

Link to comment
Share on other sites

Running weak causes more heat to be rejected into the cylinder, it doesn't affect the temperature of the exhaust gas which is maximised at full chat with over 500C at stoichiometric fuel:air ratio.

 

Emmm....not sure about that.

On a 4 stroke (what i know best) running lean definitely causes ext temp to go skyward. As you go lean, combustion slows down. Slow combustion means you get less energy converted into mechanical energy - imagine the extreme case where the bulk of combustion is taking place as the piston is way past tdc and travelling down the cylinder, you just dont get the cylinder pressure at the right time to do any good. And if you don't remove the energy from the gases they stay hot - so higher exhaust temps. Pistons and exhaust valves also get toasted.

It's got to be the same with a two stroke. Plus, and maybe more importantly the higher engine speed you get with a lean engine means 1) more combustion cycles so even if every thing else were equal that's more heat to get rid of and 2) combustion takes a finite time so at some point the engine is reving too fast for the engine to be efficient (just like the running lean logic above)... and that's more heat out the exhaust.

 

Conversely a bit of extra fuel - running rich - the extra mass of the fuel absorbs some of the combustion heat causing cooler combustion and a cooler engine.

 

I know which I'd rather have.

 

bmp01

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.