Jump to content

Log in or register to remove this advert

forced air burner "home made"


simonm
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 25
  • Created
  • Last Reply

Top Posters In This Topic

Will let you know how a old skip with a few holes low down gets on soon enough as got a lot of thorn to burn on a sssi and a skip on blocks seems to be English nature's preferred idea.

 

Sent from my D5803 using Arbtalk mobile app

 

Thats sounds more like a captive fire, than an air burner. Steve Bullman posted pic's of a steel trailer that one of the contractors he worked for uses, it avoided ground damage.

Link to comment
Share on other sites

Will let you know how a old skip with a few holes low down gets on soon enough as got a lot of thorn to burn on a sssi and a skip on blocks seems to be English nature's preferred idea.

 

Sent from my D5803 using Arbtalk mobile app

 

it workd well .but not for the skip they tend to go bright red & change shape .well mine did anu way :laugh1:

Link to comment
Share on other sites

Thats sounds more like a captive fire, than an air burner. Steve Bullman posted pic's of a steel trailer that one of the contractors he worked for uses, it avoided ground damage.

Guess so, was thinking of welding a pipe along the bottom with 12mm holes drilled in and sitting the back pack blower at the end to add a bit more air to the mix and speed up the burn to shift more stuff.

 

Sent from my D5803 using Arbtalk mobile app

Link to comment
Share on other sites

The inner container would go all shapes and sizes then oxidise to nothing

 

Once the inner skip was sacrificed I wonder how long the concrete would last?

 

I once used this method to line a chimney. I used galvanised spiral tube down the stone flue and filled the gap with vermiculite concrete, the tube did corrode away, but the concrete remained.

Link to comment
Share on other sites

Not quite sure on the science of a air curtain burner but that the temperatures of the burn are so high that there is virtually no smoke pollution,good for site clearance,but if they were that good I would of thought we would have seen more of them.

 

Expensive hire and haulage, they also dont burn as much per hour as advertised and you still need a burn license. The plus side is no smoke ( the bit that matters to us on here) and they are really efficient at getting rid of dry demolition timber in places like London where tip charges are mental.

 

Bob

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.