Lights and front mounted equipment

[Gray git]

Unfortunately not my machine but had it available to use till the lad who's machine it is got more and more work of his own.

Eventually would like to put 1 on this valtra which is why I went for a newer bigger model.

 

Sent from my D5803 using Arbtalk mobile app

[Breezeblock]

have a look on eBay for job 3cx style headlights mount them on a bracket or cage them in and hey presto your legal I would also find some way of disconnecting the front lights on the tractor as I think the reflection off the back off the winch would be a pain in the arse

[agrimog]

Ive got a sign which goes on the front of my splitter when its on the front hydraulic lift of the mog..........it says "your car is my crumple zone"....... folk seem to give it a wide berth

[aspenarb]

I reckon its worth making up a light board for the front with the headlamps and indicators, it could go on a seven pin trailer socket.

 

Some blurb on heights etc

 

Transports Friend - Lights and Positioning

[Daniël Bos]

Gave this a bit more thought.

Make two lightboards, one for each side. Two half size boards would be far easier to safely stow away I reckon.

Manitou telehandler lights are good I reckon, have indicators built in too.

 

Sent from my E5823 using Arbtalk mobile app

[PC Treescapes]

Or headlight /indicator setup off a telehandler front mudguards. Weld a locking hinge on the light bracket and onto the rear of the winch plate either side. Can be folded back behind the winch when using winch, then swing round to position to go on the road, could always fix a couple of side market lights on the side of each headlight assembly, then all sorted

[PC Treescapes]

marker even

[Mulcherman Chris]

have a look on eBay for job 3cx style headlights mount them on a bracket or cage them in and hey presto your legal I would also find some way of disconnecting the front lights on the tractor as I think the reflection off the back off the winch would be a pain in the arse

 

 

Not sure about the valtras but on some tractors when you plug extra head lights into the 7 pin plug on the front linkage it switches the tractors head lights off automatically

 

Chris

 

 

Sent from my iPhone using Arbtalk

[Gray git]

Valtra are easy, switch on dash turns them off and flips up to cab lights that are Road friendly with high and low beam controlled on stork same as fronts, also found a handy little plug behind bonnet that comes live when you do this where I can plug in the marker lights.👍

 

Sent from my D5803 using Arbtalk mobile app