New Husqvarna s wont start

[eddystihl]

Received today my new Husqvarna s 550 xp and 562xp

The dealer told me he had started them .

But at home the won t start

He said that start with the choke and when the light up put of the choke .

Any advice ??????

 

 

Sent from my iPad using Arbtalk

[Andyd1606]

Don't use the de comp valve mine have never worked from new on any of my husky saws!

[Mick Dempsey]

You are pumping the primer presumably?

[Stubby]

From cold . 5 or so pumps of primer bulb . lift lever to choke poz . Decomp in . pull till it fires . Will now be on fast idle position . De comp in again .Pull again and it should fire up after a couple more pulls . Remember ignition is ALWAYS on . Springs to the on position when pushed off . Hot start less primer and forget the fast idle position .

[eddystihl]

Pump primer full yes

 

 

Sent from my iPad using Arbtalk

[eddystihl]

So after it fired up with the choke on it get of automaticly then , decomp on again and pull

 

Did you had the same problems in the beginning ??

 

 

Sent from my iPad using Arbtalk

[lux]

Buy a stihl .........

 

It's bloody annoying that whatever make you buy they have issues now. Too many bloody electrics etc.

 

Credit to echo for staying a bit more old school but they seem flimsy in construction and lack performance in comparison.

 

Can someone please get back to making good old fashioned saws that don't fall apart and actually start and run without fuss......

[Mick Dempsey]

Buy a stihl .........

 

It's bloody annoying that whatever make you buy they have issues now. Too many bloody electrics etc.

 

Credit to echo for staying a bit more old school but they seem flimsy in construction and lack performance in comparison.

 

Can someone please get back to making good old fashioned saws that don't fall apart and actually start and run without fuss......

 

Nonsense, new saws are great, better than ever.

[Stubby]

So after it fired up with the choke on it get of automaticly then , decomp on again and pull

 

Did you had the same problems in the beginning ??

 

 

Sent from my iPad using Arbtalk

 

No never had a problem starting my 560 . Used to cut out and stop sometimes put that was fixed when Petemate fettled it .

[Gary24]

I agree mick i got two 550xp and both start 1st 2nd pull every time