All Activity

Or like this if between two.

For only a k (assuming it's a one off) I'd have probably made up a yoke/pole type thing.

But alas. If you want proper Kid Rock, it's probably this Kid Rock, who you probably wouldn't leave your children with.

Here's a gateway.

How about Kid Rock? It's not country but it isn't not country. I suspect most people on here have met a groundie who looks like him.

Any info on this Mark?

Also live at San Quentin. Any drummers on here? I like the St Anger snare. I like the song. I like the album.

Has anyone ever had a ventile jacket? https://hilltrek.co.uk/clothing/smocks/braemar-hybrid-smock/

The stihl micro 1/4" chains sharpen up well with the 3.2mm, they are just a bit fiddly to do. A guide helps a lot as the file can bend if you put too much pressure on it. We don't offer a chain sharpening service as its just not worth the effort but I did used to sharpen our ms150 saw when we were still climbing. You just need to have a bit more finesse, or, if its hit something nasty just fck it in the bin. Oregon has two types of 1/4", the standard uses a 4mm and the micro a 3.2mm. This is the 4mm file size fitted to a few machines but mainly the older echo cs2511 with the 1.3mm var Oregon ControlCut Chain - 25AP 1/4".050" - Skyland SKYLANDEQUIPMENT.COM Get your smallest jobs done just right. 25AP is lightweight, smooth chain, ideal for pruning — our Micro Chisel® cutters have small-radius working corners for excellent performance... This is the 3.2mm file size for the ms150/151 and the newer cs2511 1.1mm bar Oregon AdvanceCut Chain - 24AP 1.1mm - 1/4" - Skyland SKYLANDEQUIPMENT.COM The Oregon Advance Cut 24AP is a fast cutting low profile saw chain. File Needed - 3.2mm - 1/8" For Chainsaw Models - Stihl MS 151, MS 151 TC, MS 151 TC-E, MS 194 T, MS 194 TC-E...

I've ordered a couple of frame packs now.. went for the Tatonka ones..

Had this stuck in my head for roughly a calendar quarter.

Possible that we can get closer through a FC site, which needs checking out. But still, up to a 1km of walking may depending on where we'll be working..

A google shows a thread on reddit for the ap300 battery which suggests the BMS may store a fault code that needs to be cleared after a repair, it maybe that Stihl have done a John Deere on this. If @kram is right and there is no power control from the BMS via a MOSFET or IGBT then the BMS may communicate something to the charger to prevent charging and even after repair the battery may not work until this is reset.

They look like the one. Are they not here yet?

Wordle 1,637 3/6 ⬜🟨⬜⬜⬜ ⬜🟨🟩🟩🟩 🟩🟩🟩🟩🟩

Anything ...absolutely anything but Christmas songs I cannot stand the fu£5&ng things !!!!!!!

I have the guide which I got a few years ago, but decided I should spend more time on freehand filing and never used the guide! I think like you, for the 1/4 chain it would be better without.

looks like turkey oak to me ....

This is true, we have lost all the concessions that Thatcher won for the UK, we would start again as a new member including things like taking the Euro. Once out, no going back under the same terms and conditions. If the politicians (listened to the current 'will of the people') worked to go back again I reckon all our past membership would give is a fast track membership. The Brexit vote was a hastily thought thing to appease the Tory back benchers giving Cameron a hard time, his gamble failed, and as they say, act in haste, repent at leisure

I've learned, measure the bits because they are not always on size. For the small Stihl chains, no one sells a 3.2mm bit specifically for chainsaws, however a worn 4mm bit, works very well. Theres also 3.2mm bits in most diamond bit sets. I got a load of them from amazon. I did try with the fancy guides that screw on the tool but its much better free hand.

There doesn't look to be much in the way of BMS electronic circuit board in there, but it maybe behind the charge level lights and reset knob, I will strip it again and look for it.

When you get the digger only slew clockwise, if you go counter clockwise the cab will fall off!

Good idea! I've got a Dremel and I think some 4mm rotary Granberg bits, I'll give it a go! Just got to get the battery up and running.

Theres equal chance its just flat. A lot of packs do not have any fuse or mosfet capable of disconnecting the packs, often connections go directly to the tabs and the BMS is only there for charging and monitoring.

Load of poplar, to me the smell was a bit 'sheepy',