EricBradley
-
Posts
96 -
Joined
-
Last visited
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Calendar
Freelancers directory
Everything posted by EricBradley
-
Why did saw seize in first place has that problem been cured, you need to pressure test the crank seals ideally. Most likely be the coil breaking down when warm, quite common fault.
-
sounds like clutch spring has snapped or one side of the clutch shoe carrier has cracked allowing one shoe to fall.
-
you must be the only person in the world who dosnt like the hs45, they are a brilliant little machine,
-
is it a hs45?
-
Whats the new bearing like? looks like its gone, take it apart and have a look if you haven't already.
-
1137 020 1203 Ordered. £44.43 for a new genuine piston and cylinder kit. For that price its not even worth considering aftermarket parts like I was doing at one point. When did Stihl slash their prices?
-
no sealant on the gasket just completely remove the old gasket from all surfaces, hedgecutter flywheels don't have a thread on them like the saws.
-
Thank You.
-
Does anyone know what the difference is between the three part numbers for the 192T piston and cylinder kit? 1137 020 1200 1137 020 1201 1137 020 1203 The guy on the counter says all are available but he cant say which one replaces the one on my saw that is a 2013 model with the cylinder date stamped 2012. A search online says that they changed the inlet manifold mounting on one of them but I cant find out which one. Has anyone had any experience of these parts? Help would be appreciated as I don't want to be ordering the wrong one and then having to go through the rigmarole of returning it and waiting for the next one to arrive to find out its wrong again and then being third time lucky.
-
Sorry you've been turned over, was only thinking yesterday that nothing has been posted in this section for 5 weeks so thefts must have died down since that big find at the Irish Docks. Logging serial numbers is one thing, I always get pictures of all my gear with its markings and identifying marks, seeing a picture of a machine with the postcode and name marked into the plastic is a lot easier for people to look out for than saying it has my company name on it.
-
How long was it sat underwater? I'm guessing a good few hours. Ideally it needs completely stripping down and cleaning, white rot will also have started to set in.
-
Take exhaust off and have a look at piston, sounds like a knackered or worn piston and cylinder to me.
-
If its the saw in your other post you are selling I wouldn't bother, a new bar and chain will cost more than the chainsaw is worth,
-
Sounds like the carb is not clean enough, have you had it in a ultrasonic cleaner? if not and you don't know anyone with one most motorbike shops have one and will charge around £15 to boil it for half an hour.
-
This wont work on your machine its not a hl135 its a hs61, completely different set up.
-
disconnect the two wires and try it, have you got the insulator in place?
-
It looks like its screwed in, some are moulded in and wont come out. Take the unit off it makes it a lot easier.
-
http://www.cnczone.com/forums/attachments/1/2/8/1/3/506898.attach
-
The majority of the new stihl saws have the plastic insulator, some just have plastic washers, the part number is correct 1139 is the series of saw, this equates to the 171 181 211. 1302 is the ending of the part number, all that's missing is the 400 in the middle like all stihl coils have, so the part number is 1139 400 1302. Not sure of the configuration of the coil / flywheel but you need to get a coil that ends in the same last 4 digits as your origional or the part that has replaced it, some flywheels and coils you cant mix and match. If the holes wont line up with the mounting holes on the cylinder its deffinately the wrong coil.
-
Item 4 Husqvarna 136 Parts List and Diagram - (2003-01) : eReplacementParts.com
-
The little rubber grommet into the cylinder will be perished and or split is my educated guess
-
How far is the seller from where the stuff was nicked from? The seller looks like a car boot buyer and flip it on ebay for a profit.
-
Coils on these 171 181 and 211 are all the same and they do suffer from failure more than any other series of saw I know of. MS180 coil wont fit.
-
Mityvac MV8500 Silverline Elite Hand Vacuum And Pressure Pump Kit | eBay I have the older model of this one, had it 8 years and its well worth the money.
-
Ive never seen damage like that to a piston, looks like inlet side. There will most likely be a a foreign body in there somewhere. As for ebay parts, the majority of the bits the uk sellers sell on there are from china aswell, they import it by the container full.
