waterbuoy

If you are not used to writing, or just out of practice, it can be difficult to 'get in the groove.' As someone who writes a lot (often more than 20,000 words a week) my advice would be to start by putting something down, even if you think it is gibberish, and then sleep on it. It is far simpler to rewrite or edit something than sit staring at a blank screen. The fact that you have written c. 170 words and most of them are bollocks at least means that some of them are not! It can also help if you try and plan a framework of what you are wanting to say - even if it is just bullet points or subject headings that you can go back to and expand at a later time. Similarly, don't be afraid of asking your significant other (if you have one) to take a look and give you their opinion - be prepared for some brutal feedback though!

'Consultancy 101' states that the first part of being a successful consultant is understanding the client's requirements. I thought the OP was wanting to retain three of the stems and remove 2 ?

I suspect if you paid three consultants you would get three different answers!

If I remember correctly (we looked at a lot of trailers that week ) he had a couple of different types. The HD one seemed to be well built whereas the lightweight model looked like it would not be so good at coping with the abuse we tend to give them. My mate was impressed by the 3-way tip as previously stated, but was concerned that the way the ram was mounted compromised the ground clearance. I think this is typical with most 3-way tippers to be honest. The 'normal' tipper looked to be strong and well built. We decided to stick with Ifors because we are based a long way from anywhere and they have a reasonable support network for spares etc. Yeovil is almost 600 miles from us but they seemed to offer good support at that time. Edit: Thinking further on this, he was more than willing to make any mods that we required, and from what I remember their brake/axle/hitch systems were pretty much standard units.

Afraid I cannot remember. I'll ask my pal as he took the card from the guy.

Lets be honest - we will all be paying for the 'magic money tree' for years to come.

Given that I live on the west coast of Scotland I am surprised to be able to say that I visited his workshop/factory/showroom a couple of years ago after the APF show. The owner seemed a decent guy and his trailers looked to be OK. Was quite happy to chew the fat with us and answer lots of questions even though my colleague told him he was probably going to but an Ifor. Looked to have an interesting 3-way tipper which was the reason for our visit - being able to tip firewood either side in driveways is/was seen to be a useful feature. May not help you with feedback on using the trailers but at least they ahve been around a while.

It has been announced that the scheme is being extended for another three months, albeit at a slightly reduced rate. You should be able to apply for the new scheme (I think in August), and are able to continue working whilst claiming the grant. All you are declaring is that Covid has affected your ability to work.

I fink it iz crooked from wot has been said

Wash your mouth out with soap please! I introduced chain speed because the OP stated that 'The chain speed is slow' with regard to the DeWalt he has just bought.

Don't worry - I'm well aware of that, and am far dfrom a snowflake!

I was trying to stick to similar priced saws to the one the OP has purchased, and quoted the 120 The important thing is that they ALL have s significantly higher chain speed than the DeWalt (according to the specs)

Original edited to accommodate the pedant!

And before you ask, I can't find a speed for the Stihls

11.5 m/s ?

May be stating the obvious but most of the saw specs give a chain speed. Einhell is 15 m/s, Makita is 20 m/s and some Dewalts are quoted at less than 8 m/s. Guess which of the three companies also makes reputable petrol chainsaws?!

You are not alone - I am still awaiting an oil cap that was supposed to be with me more than a week ago, and some creosote that was 'out for delivery' at the end of April!

Nope - it seems clear to me !

Be warned - my son lives in Temple Sowerby (close to Appleby) and joined in a general moaning thread abcout the travellers during one Appleby Horse Fair on FB. He was 'visited' by three of said travellers who did their best to alter his train of thought - not by gentle persuasion either! On that occasion plod did get involved.

Indeed - oops! Both had certain merits in their day!

Hire in a larger unit to break the ground and then use a smaller machine in years to come. Simples.......

Ah, them were the days - Angela Rippon, Pamela Anderson and NTNON

Suspect you have made an error in the kiln dried cost statement ? Also with regard to weight - nothing can 'weigh less per kg'?!

Ditto Can you imagine if a dog walks over the area shortly after it has been treated with one of those - it's paws would be like a pin cushion!