maybelateron

I spent all my teenage weekends and holidays working on the farm over the road, loved every minute of it. Wanted to go into farming but parents persuaded me to follow the family line into medicine. Became a GP, loved the job I trained to do. After 14 years in a stupidly busy practice I realised my mental health would not survive at this pace/stress. Decided to follow my outdoor work needs so went part time GP for 12 years, and started self employed arb work, after doing CS 30 31 38 39. Took on two employees while still working both jobs. Decided at 53 that enough was enough, still loved the GP work I trained to do, but system driving me mad, AND loved the arb work/climbing just as much, so went full time into arb.

All evergreen chip or mixed loads of evergreen + deciduous go to a local concern where it is dried and used for biomass. Likewise any large timber we don't want goes to same place where they have the ability to process it into chips. This does not cost us anything. Sweepings that are contaminated with soil/grit get taken to a local greenwaste recycling business, where we have to pay to tip. It is ultimately shredded, screened, and turned into soil/soil improver. We keep good clean deciduous chip in our yard and sell it on as garden mulch. Harwood gets processed into logs for our own use, and logs for sale. I also burn quite a lot of softwood, including conifer in our own boiler to heat our house. Also, not surprisingly, an increasing number of domestic customers keep the timber for their own use.

I fink this issue is bein looked into by some language expert's.

Still got more coming in than we need, especially as we are now a three man team, not four. Used to have lots a repeat hedge work, as security for the wages etc. Now stopped virtually all hedge and shrub work, which suits my shoulders nicely - holding long shaft hedgecutters out over the top of a wide hedge is not my idea of fun any more.

Saw them live in the 70's, great band. I'm not a guitarist, but was Phil Lynott's guitar longer than normal?

Agreed entirely. The C section chassis is what made me opt for the Daily rather than Transit etc. Definitely needs helper rear springs, but simple to sort out.

You raise a lot of good points.

Yes, I have followed a few of these sorts in recent times. Know exactly what you mean.

Definitely agree about the thumb. I have a Bobcat E10 we use intermittently in my small domestic arb firm. In terms of cost/benefit the thumb is a real winner for moving/loading timber, and even holding sections while they are ringed up. Also agree a grab with rotator is superior but then it costs more.

Maybe he engineered it to get several weeks off work😂

Back in 1983 my wife was a junior doctor at the Birmingham Accident Hospital. An ambulance came in from a bad RTA, with a police motorbike escort. In those days we had ice in winter. Yes, you guessed it, plod on the bike tried to be smart at the entrance to the hospital, did a footbrake turn (I guess you call it that on a bike), flipped it over it fractured his femur when it landed on him. He must have felt such a plonker!

Certainly not the usual endless request for quotes, but by no means dead in the water; also got the regular hedge/repeat pollards ringing up on top of the regulars booked in from one season to the next. Tall hedges are such a mixed bag - a pain when you are busy, and a godsend when you are quiet!

Certainly looks like Ash. What's the story?

Following on from my original post I have had a demo of the Hinowa 17.75 - it seemed a well enough built machine, but it could not match my old Aerial K16T for outreach, except so low down you could use a step ladder. I feel outreach is crucial, if anything more so than maximum height. I am going to look at a new CMC18F next week - massive outreach of 11m with one light operator, and still very good outreach with 2 ops. Less electronics on it, and you can level it yourself. Old fashioned valve block by (not in) the basket. Anybody any experience of CMC?

Good luck in the future.

Which conservation area is it?

Got to site 8am today, did some crown lifting (ready made sombrero above us), cut some Laurels back. One lad climbed into a Sweet Chestnut and removed large deadwood sections. Two of us stayed under a Lime and used hand saws to dissect out epicormics from around TWO metal fences next to it. Yes, two - one is modern and galvanised, the one nearer the tree is old and rusty, decades old. Tomorrow all team members can start early, so 5am at base, on site 5:30 using hand tools, then mini digger 8am to pull the fences out of the tree! Home by noon, having worked with big sombrero all morning.

Exactly what we are doing today. I am taking chainsaw trousers and normal trousers. I will do the little bit of chainsawing needed, then get out of the chainsaw trousers. The pull ropes for two straight fells will be installed with the rods, or a climber in shorts! Also a short day and knock off.

Even if this hot weather, with very hard ground, we lost traction in a field, trying to get up a mild slope. As soon as the dew was gone, no problem. Needless to say the vehicle was empty at the time; if it had some weight in it would have gripped better.

I have an Iveco Daily 2.3, 146bhp. Advantage of the Iveco is it is built on a proper C section chassis, not thin box section that will rot due to corrosion inside the chassis. Yes, I would expect the bigger 3 litre to last longer and be better. I would not place a massive amount of faith in the AWD aspect of the Transit. Tyre tread type is pretty important, and a tractor/Land Rover type 4x4 can rescue a 2wd tipper.

I am still in the lucky position of being able to decline to quote for jobs that I don't want to look at. I guess this is partly because we have a large list of regular tall (ish) hedge customers for the Autum/Winter (tall hedges not tall customers), which is a pain when we are over busy, but a bonus when things go quiet.

Depends on what it costs you. When I set up 22 years ago I found word of mouth worked well. A few simple things like return every call, turn up when you say you will to do a quote, turn up when you say you will to do the job, leave the place tidy, put your quote in writing with a copy of your insurance, will go a long way to beating back the cowboys, at least for customers who want, and will pay for a professional level of service. Best of luck👍

There's always someone able to offer a horror story about a particular item. I'm on my second TD5 Disco 2 auto, been very reliable. Yes the chassis has had a bit of welding, and if I keep it for more than another three years I will probably have a galvanised chassis fitted - it has only done 105K miles, and the TD5 will do another 100K if looked after. The garage I use say stick to low mileage older vehicles with less electronics to go wrong, and I agree. The disco will tow 3.5T, it is excellent off road with all terrains fitted. It is just good value for money, unlike the overpriced Defenders now they have such a cult following.

Apologies if this has been covered before, but I don't recall it. I have for many years used my old 1996 Aerial K16T, trailer mounted MEWP which is well maintained, no modern electronics to speak of. I have been very happy with it, but I am considering replacing it now, but it has to be better. It must be tracked, so I have better access to awkward sites. It must have a working height of 16m or more, and outreach must be 6.5m or more. It must be light enough that I can tow it on a trailer with my 3.5 ton towing capacity. Some of the machines within this spec will just fit onto my Ifor GX126 plant trailer, but if I need to invest in a longer trailer so be it. I have found the fly jib invaluable for dropping down into a crown, so it must have a fly jib. I guess straight sticks are ok for dismantled, but no so good for some pruning jobs. I am happy to invest in a new one, or a goos condition used one. Not sure about lithium ion ones, have used a hired one once. Prefer dual power, so early morning in residential area can be quite, then start the engine a bit later. There is an Oil and Steel 1765 on ebay at present - any experience of that make to pass on?

I've learnt something new. l didn't realise that a low compression saw would be worse at hot starting. Is that because the cylinder expands more that the piston and rings as it warms up?