Jump to content

Log in or register to remove this advert

maybelateron

Veteran Member
 View Profile  See their activity

  • Posts

    1,075

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by maybelateron

  1. maybelateron
    I have found it varies from saw to saw regarding how long you have to keep pulling them over after this type of mishap. Most of my Stihl chainsaws start up OK after what you describe and the action you took. On the other hand my Echo top handle saw took ages of pulling until it sputtered back to life, and the Stihl hedge cutter was similar.
  2. maybelateron
    I have got the new version of the Rock grinder, the SGR-33. I think it is excellent value for money, and well built. It is surprisingly good in my opinion. It is certainly adequate for stumps up to 10-12 in diameter, as long as you don't need to go more than about 8 inches below ground, and it is not on a difficult slope, or up a slope to get to it. I think unless you are planning to do quite a lot of grinding, and larger stumps, this is a value for money machine. I know one guy from Stumpbusters, with loads of experience of machines, who feels that Predator lack something in build quality, and says FSI are much better.
  3. maybelateron
    Steam cleaner works wonders on it. Failing that hot water and detergent.
  4. maybelateron
    Is this the permanent move you mentioned previously or just visiting? Where are you, as we have got power again now. If you're struggling I have a petrol genny you could borrow.
  5. maybelateron
    I can feel a day of log splitting and machinery maintenance coming over us tomorrow.
  6. maybelateron
    Indeed it is. I expect the Buxton and Cat and Fiddle Roads will be closed.
  7. maybelateron
    I assume you are talking about the previous Iveco Daily, rather than the latest shape? I have a 64 reg Daily tipper with the 146 bhp engine. It is a great vehicle, but 1st and reverse gear are to high. Hill starts with a loaded chip box and 1.5 tons of chipper on the drawbar are not nice to the clutch, particularly if in inexperienced hands.
  8. maybelateron
    Agreed. I went down to one chipper 6 years ago when I upgraded to a much better machine (Jensen 540 turntable). Felt a bit lost without a backup machine (Jensen parts if coming from Germany are not exactly overnight!), and could see the benefit of a tracked chipper, so bought a Forst TR6. They compliment each other well.
  9. maybelateron
    Aaaaargh, grim.
  10. maybelateron
    Give it another 2 -3 weeks and you'll have to wait for good enough light in the morning to see the BT cables running through the tree.
  11. maybelateron
    This is a no brainer to me. You can't expect a customer to suddenly agree to paying 20 per cent more than the original quote. All they would see is that they are being asked to pay 20 per cent more, doesn't matter if it is going to HMRC or the monster raving loony party, they are still paying it. I had the same situation 8 years ago, but had anticipated that VAT registration was looming, so I made it clear with quotes around that time that VAT might be added, and take it or leave it.
  12. maybelateron
    With screwgates I screw them up fully, then back off a fraction of a turn, making them easier to undo if loaded significantly. I can't see this being a problem. Same concept as with the valve where your mains water joins the mains, and where it enters the house - crack it back a turn, easier to turn off in 10 years time when there is a crisis.
  13. maybelateron
    I find a variety of loop lengths is best for speedlining. It makes it just a little easier rigging several branches to set up, then cutting them off one at a time. Saves having to pull the speedline rope to reach that branch round the back or side of the trunk.
  14. maybelateron
    I am dumb. You are in Hemel Hempstead.
  15. maybelateron
    Whereabouts are you? One of my friends has had one offs made for a 90 y.o. car and does fabrication work for a large local tanker fleet. He will know someone, if he can't do it. We are in North Staffs.
  16. maybelateron
    I found these two entries very refreshing. Know exactly what you mean. We did a job a few weeks ago dealing with some tall hedges, charging £500 + VAT, which turned out to be spot on for our hourly rates. Customer had been quoted £2,000 by one of the local scumbags. Needless to say she was elderly and alone.
  17. maybelateron
    Replaced mine a while ago, with ones from FR Jones. Main front strap was fine, calf strap fine too, but the small one around heel would not stay tight. I used a couple of new 25mm cam buckle cargo straps cut to length, drilled/heat sealed then fitted. Works a treat and much better.
  18. maybelateron
    Fifteen or so years ago our first Newfoundland had to be put down,😢. After the day's work I needed to dig his grave in the field, and the ground was dry and hard, so I decided to use the old JCB 3c I had then. It had not been moved for about 3 months. As soon as I started it up the wasp nest in a locker on the side of the cab woke up. I had 13 stings on my head and neck by the time I had jumped out of the cab. I used a long pole and blower to destroy the nest, fortunately with no more stings, then I was able to bury our beloved Newf.
  19. maybelateron
    Forecast was wet wet wet for today. Had traffic lights booked for the job, so had to do it. Thought we were getting off lightly till about 2pm. Ended the day climbing a large Hawthorn overhanging a fence, with lots of Ivy in it. Really heavy rain, can't remember the last time I felt rain running down the inside of my chainsaw trousers. 💩
  20. maybelateron
    I just tell them I have quoted as low as I can anyway. Or you could say you'll drop the price a bit for guaranteed payment on the day, with invoice provided.
  21. maybelateron
    Agree entirely. Different if you have already started a dismantle, wearing spikes, and just want to get it finished. NoNo for me pruning smooth barked trees in the wet.
  22. maybelateron
    Yep, it's pretty straightforward if you put all your invoices onto the computer rather than the old days of throwing them into a drawer. I have a couple of non VAT registered friends who do just that, and then run around madly on 30th January trying to sort out a tax return!
  23. maybelateron
    Same story in Stoke on Trent and surrounding areas. Also we have a lot of tired looking mature/young mature Beech in our area. I remember the Beech took a real scorching in the drought and heatwave we had, was it 2 or was it 3 years ago. Wonder if that is a factor?
  24. maybelateron
    I beg to differ. I went VAT registered 8 yrs ago. We are 95% domestic, and are never short of work. Also being able to reclaim VAT on expenses can help to some extent as it reduces running costs compared to not being VAT registered.
  25. maybelateron
    Saturn Machine Knives, Sheffield. You organise courier to take them, then they send them back. In January they charged me £60.60 to sharpen 2 sets for a Jensen 540 and one set for a Forst TR6. Can be a bit slow turning them round at times, but I'm always happy.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept