Jump to content

Log in or register to remove this advert

SteveA

Veteran Member
  • Posts

    3,242
  • Joined

  • Last visited

Everything posted by SteveA

  1. We have Tyvek breather membrane in the roof of our house, seems to be good stuff and I'm thinking of using it for our timber barn. Cheers, Steve
  2. Shame there aren't any UK dealers.
  3. Been pretty wet here for a couple weeks. Lots of water. Wind seems okay, (generally) with two gale force winds so far. Autumn colours seem pretty dull this year.
  4. How many signatures yesterday?
  5. Ah, in that case I retract my statement.
  6. I'm guessing that the views counter tots up each time someone revisits the thread.... I've visited /read ithis thread a few times myself. Cheers, Steve
  7. Have you considered running your saw on cider?.... less headaches!
  8. From what I've seen on Arbtalk I think that's not true. I think the petition is slow to gather signatures because there is little emotion to attach to.... it's just the nature of the subject. Cheers, Steve
  9. SteveA

    Bee Query.

    Certainly would! I just need to gently tap the roof on our warre and you can hear the whole colony buzz a bit louder for a second or so. It's like a warning sound!! Best to wear a suit if drilling & screwing.... and definitely if hammering. Looking at the photo of the entrance, also wondering if rain is going to get in there, could do with some kind of roof overhang. I'm assuming that the hole was positioned facing slightly downwards when it was attached to the tree, so rain getting in wouldn't have been such an issue.
  10. That's superb. I would so love to be able to do framing & peg joints like that. Don't know where I'd begin?? Have got plenty of trees to choose from but not even sure which are most suitable. Thankyou for the info and for the link, much appreciated. Cheers, Steve
  11. SteveA

    Bee Query.

    Excessive moisture getting into the colony is probably their worst enemy. Orientation doesn't really matter too much as they could build combe just as well horizontally as vertical. My Warre hive entrance is about 15cm from ground level, so if their entrance is positioned just above ground level it should be fine. The main concern is the big opening that you have on the branch end.... looks like driving rain could blast through there. Cheers, steve
  12. Erm, perhaps try running your saw on alcohol? Less remaining to get a headache!
  13. Ah! well I wouldn't recommend Aspen as a hangover cure but if you get headaches from working with chainsaws, mowers, strimmers, etc then I reckon it probably would (apart from working in very confined spaces).
  14. We'll have approx 25cm roofing overhang. How far off the ground do you suggest keeping the timber? We've been thinking of going around the barn perimeter with concrete blocks and having the posts sat on that, so the oak posts & larch cladding would be about 6" above ground level. Going for a zinc roof which will have insulation under, so no concerns about condensation.
  15. Great thread - deserves to be a sticky until the petition numbers are reached. It is expensive but I no longer get ANY headaches since switching to Aspen. Cheers, Steve
  16. Cheers for info. For durable wood we mostly have oak and quite a bit is wide, tall & straight to choose from....but not sure what varieties of oak we have? Presumably some oaks are more durable, some not? (so I've been told).
  17. That's pretty daft
  18. Which gloves were you using? The Ripeur gloves are great protection from natures needles & in case you're interested there's a thread about them on arbtalk, somewhere. Cheers, steve
  19. Pop your Arboween-Halloween photos here.... try to keep them arb related and as daft as possible - just for a larf.
  20. Check links from below - presents 404 - Ten four Bear in the air Over! - - -
  21. 4 times now....
  22. Oh dear, that's not a good sign

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.