Jump to content
Status Updates

Log in or register to remove this advert

Big Beech

Veteran Member
 View Profile  See their activity

  • Posts

    1,139

  • Joined

  • Last visited

Everything posted by Big Beech

  1. Big Beech
    so, I will be treating myself to a nice new Erbauer track saw from screwfix, at that price can't be beat really for the amount of times I am going to be using it and with a respectable depth of cut to at 67mm. I am guessing the saw will come with a medium to fine finish blade, but looking to rip down the length of some 2" seasoned Beech..... any suggestions on a good blade? I've also upgraded the track to 2.8m ? Picking it up on Thursday ?
  2. Big Beech
    It does feel sharp I must say, flew through the bit oak with the 070. I am sure it will settle down.
  3. Big Beech
    Fine grade, and nothing hit. Was just literally a tickle.Stihl ripping chain.
  4. Big Beech
    After that large maccy log and two oak lengths the chain was filling pretty rapidly. I bought myself the granberg electric sharpener many years ago and recently adorned it with the new diamond bit. After tickling the chain today was its first outing and it was very grabby in the cut and not as smooth as hoped. New chain and I haven't touched the takers. Any ideas why this may be?
  5. Big Beech
    Typical
  6. Big Beech
    The listing read that it was only for the new end bracket design and was in that statement not backwards compatible ?. So therefore I bought a whole new spares pack.
  7. Big Beech
    occasional dimensional timber could be useful, though never cut more than 3x3, which i run down with a circular saw. I cant actually recall a time I needed them, most sales and usage seems to be boards. I have the original vertical mill, used it once or twice. My father is a fabricator so ill see what we can come up with!
  8. Big Beech
    Looks like it may be the way forward, the ease and simplicity of adjustment looks like it would fit the down side of my troubles. Well I suppose not troubles, just time consciousness of adjusting each cut.
  9. Big Beech
    Any experience with them? Few videos on the tube, nothing of note when I was quickly looking about? Any videos, few half videos ??
  10. Big Beech
    Spending time online is never good, and always seem to cost money ? Wondering about the Panther Mill ? The ease of adjustment could be just what I am looking for this new racking setup. The cost is a little off putting, though guess I can sell my existing setup possibly. Or does anyone know or think that the uprights and control rail are compatible with the standard profile section of the original Grandberg?
  11. Big Beech
    Edited it, finally found how to do it !
  12. Big Beech
    I have the old system, and I am not prepared at this stage to shell out for the cost of the new brackets and quick release unit. If they where backwards compatible it may be an option, but they don't look to be or read that way on the description.
  13. Big Beech
    It probably is, as once the mill is set for a two inch slab and you don't need a different thickness then you carry on until the log is finished. However in this set up you have to adjust EVERY cut.
  14. Big Beech
    The main orange racking rails stay the same for 80% of the milling in their setup position. As long as the log does not protrude through the rails to snag the mill.Only adjustment made is to the mill legs.
  15. Big Beech
    These lumps of Burr Oak, are the remains of the big Burr Oak i felled 5 years ago, some of you may recall the original post! I managed to extract them today as the terrain was dry enough, and I cant wait to see the boards they will yield!! Oh and I'd totally forgotten about the 5" quater sawn beams i left behind as I couldn't move them at the time. Just make them out at the back ?
  16. Big Beech
    Possible I suppose in theory, though on moving the timber would most likely move the levels around. Its not ideal, but it is what it is!
  17. Big Beech
    As above! Get up you old git ?
  18. Big Beech
  19. Big Beech
    These rackings are able to hold 2 tonnes, if you fancy putting a large log on board ? That Oak log is 7ft x 16", I doubt aluminium would hold up well. Just uploading a YouTube video!
  20. Big Beech
    The rigidity is very important to keeping things square and level, and I dont think aluminium would be the way forward.
  21. Big Beech
    For me, with such a small 1" wide front and rear rail there is always a problem getting the back rail level with the front. As much as ive tried for what ever reason with a big saw and bar never really get good boards. This, whilst slower is spot on.
  22. Big Beech
  23. Big Beech
    some of you commented on my maccy boards and spotted the evolution of the palllet racking setup. As promised today saw a different setup as the logs have been slightly smaller! Some lovely cats paw Oak fresh felled this morning from a woodland as it had been standing dead for a few years. Very pleased with the rig, no real headaches that I've come across apart from the time frame of setup, I guess I don't mind as I am just poking about. Board quality still Impressive though. Only negative is the change of height after every cut. Perhaps the old Stihl mills with the windy handle would be more beneficial, perhaps I did see though out of stock a quick release option for clamps. First day overal I am pleased ?
  24. Big Beech
    I was close to the board as I couldn't get back any further as the board was big! Yes, Eagle eyes viewers it is pallet racking. Best move ive ever made, had the idea for some time, and looking to develop it a bit more. Boards are top quality and smooth as silk. Not the fastest way as you have to adjust every cut(mill) not rails, but I don't mind that as the boards speak for themselves! Been a lot of interest in them and have sold 4 so far. That was a hench piece of timber, and have another set of rails that I will using as guides for smaller pieces on a double pallet. Thats Thursdays pictures!
  25. Big Beech
    This is an interesting topic, as ive just recently planked a large one with beautiful baords. I have an opportunity perhaps for some other sections and know of a large specimen about 6ft in diameter and wonder if its worth my time doing so ?

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Read more  

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.