Jump to content

Log in or register to remove this advert

shavey

Veteran Member
  • Posts

    3,255
  • Joined

  • Last visited

Everything posted by shavey

  1. my father in law used to live on the merrick estate near bransgore and went ratting with him once with the loud chainsaw and smoky exhaust many years ago :thumbup:
  2. hello paul what an amazing theatre beautiful building :thumbup:
  3. hello josh i ride hunting regular used to do alot of vermin control with terriers but as you know cant be on a horse and in the ground i also shoot alot of squirrels magpies and jays if iam quick enough :thumbup:
  4. hello yes it looks like a class 61 judging by the pics
  5. hello rich very sorry to hear that news its awful waiting for the news about treatment but you will beat it your strong mate iam sure everybody on here is rooting for you all the best andrew
  6. when you do the oil tank clean and checks the oil feed is vacumn fed from the engine so there may be a bit of carbon on the end of the pipe that comes from the engine there isnt a oil pump. also the throttle operates the carb and the vacumn switch on the oil pump that switch sometimes loses pressure and it dont pump oil but the hand oiler works well cheers mate
  7. they are still trading strong in the garden machinery market but no chainsaws as yet hopefully in the future though :thumbup:
  8. very true :thumbup:
  9. here are two bars for the rex both 404 and 25''
  10. hekko that looks similar to the atom driver that they used in australia and new zealand for drilling holes through fence posts to take high tensile wire for the miles of fencing
  11. nice job there it looks a nic cut there gotta get one soon cheers
  12. so sorry to hear about your loss its nearly as bad as losing a relative they are so honest through good times and bad and when they have been with you so long its always hard to replace them and get used to the new ones ways all the best
  13. another one worth thinking about if you are after a 40cc saw is the mcculloch cs410 good value for money approx £250 inc delivery
  14. hello alec here goes overall diameter 95mm internal diameter 90mm width of outerside of sprocket that covers the clutch 23mm width of inside of sprocket that covers clutch 20mm 8 tooth drive and it weighs a massive 295grams
  15. i cannot spare any bars at all i only got four bars between the two running rex's and one solo twin but i spoke to the chap in somerset and he has two bars defianetely maybe more bad news i havent any chains
  16. i found a sprocket off of one the old rexs in the shed i could have sworn they where all red 7/16 sprockets but there was one lurking on a saw that hasnt seen daylight for years it was an devil too come off but its off and its yours if you want it :thumbup:
  17. i got some good news good news and one lot of bad news
  18. here is a 404 sprocket rim
  19. on the earlier rex the clutch is on a splined cramkshaft model no 600010 on the later rex the clutch is on a left hand thread model 60104 this is what it is on our two saws and also some models have automatic and hand oiler there are three ways to check this an adjuster screw by the petrol cap and air line from half way up the cylinder block running to the oil tank or after you have used the saw if you unscrew the oil cap you should get a rush of air come out
  20. that is awesome looks a bit like the pipe on my solo twin:thumbup:
  21. perfect i think the gases should expell out of this pipe ok help the performance a bit :thumbup:
  22. here is an muffler for a dolmar 7900 / 7910 i was wondering what you guys thought
  23. its the first jura ive ever tasted i was sceptical at first as i always seem to stick with singleton maccallan or wild turkey but i would buy aanother bottle :thumbup:
  24. shavey

    cordwood

    good idea there are always boats here in the devon ports loading wheat, clay etc and alot of port companies would be more interested in a full boat rather than a single container
  25. my daughter got me a bottle of jura superstition and its very very drinkable:thumbup1:

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.