Jump to content

Log in or register to remove this advert

cgs

Member
 View Profile  See their activity

  • Posts

    53

  • Joined

  • Last visited

 Content Type 

Everything posted by cgs

  1. cgs
    Thanks, will have a look in the morning
  2. cgs
    Looking for some help, my tw150 feed roller have developed a problem. When machine is started the feed rollers engage and run as supposed too for about 3-4 mins then stop. You then press the infeed button and in starts for a few seconds and stops again. I have replaced relay and tried new limit switch without any success. I have also replaced electric control on direct valve non of this has worked. When I bypass the stress control it feeds in. It’s an 2007 machine and I’m stuck at what to do next. Is it a computer replacement, as I can’t see a speed sensor on the flywheel I don’t know where to go next. Thanks for any help john
  3. cgs
    I'm interested as well
  4. cgs
    Can't wait for the power pack to turn up after reading these comments...
  5. cgs
    Similar happened to us the other week caught one nicking our saws, working in a government facility with armed military police. Long story short he was wanted already and got twelve weeks in side.
  6. cgs
    I have received the chain from kernowstu, thank you very much.
  7. cgs
    Hi rich, there's a video knocking about on YouTube of the new hydro system that was installed on the Taff at radyr weir that was interesting to watch. John from orange.
  8. cgs
    Managed to spend my fr jones voucher, got myself a couple of karabiners thank you kev Stevenson and Steve bullman.
  9. cgs
    That was you in the Landy. We were in the cabstar. Job looks fun.
  10. cgs
    Thanks trucker
  11. cgs
    If you get into problems with the machine give cte a ring and ask for Martin the fitters number. There pretty good like that and he really knows his stuff. Out of the curiosity do you have the part no. For the hydraulic filter as we need to do a fluid service on ours, just the numbers on the filter have been scratched off by who ever put the last one on.
  12. cgs
    Fault code 1 was for the basket sensor on our machine 04 plate
  13. cgs
    Try forest park and garden in Pontypridd they run regular courses
  14. cgs
    We have one and as said by Gary git throw on greenery is poor, fine on wood.
  15. cgs
    Congrats rich from the gang at Orange and forest park and garden.
  16. cgs
    Tub grinder and a thirteen ton excavator that what we use.
  17. cgs
    Don't know if it's of any help but my boss has got our old trailer for sale. We used it as a dual purpose trailer behind our mog, it's got a hi ab crane with grab and timber pins and we also used to haul our 5.5t excavator or tractor on the trailer, it comes with a set of ramps and a removable chip bin. Think he wanted about 6.5k for it. It's got air brakes and a ring hitch.
  18. cgs

    <p>My boss has an arb shop and the mancoed boys where in yesterday, they have said the company has changed its name slightly and some people have gone but it's still trading on the grounds maintenance side. They have just booked a demo with us for banks mowers.</p>

  19. cgs

     

    <p>Hi there, I was wondering how I go about ordering a bull dog bone my email is <a href="mailto:" rel="">[email protected]</a></p>

    <p>Thanks john</p>

     

  20. cgs

    Hi Vis Help

    cgs replied to TTS North's topic in General chat

    We wear stein hi viz orange t shirts ( short sleeved and long depending on weather) stein hi viz orange jacket for wet weather harkie hi viz smock and trousers for real bad weather and fox hi viz soft shell jackets. All the above seem to be standing up to the abuse of tree work well and look smarten site as everyone is in a form of matching uniform.
  21. cgs
    Neal soil supplies run a transfer station in wentlog Cardiff, don't know if they take green waste at their site in beddau. Worth giving them a ring.
  22. cgs
    Screws for the adapter came out on my stein lid. Used a screw from an old saw carb works fine. Also used locktite when refitted.
  23. cgs
    Spoke to David just before Christmas, he said free tree.de are distributing for Europe, but free worker have them on their website aswell
  24. cgs
    Hi Steve, Rhys should have them in stock, give him a ring in morning. Ta john
  25. cgs

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept