mikecotterill

tried googling this on the net but cant find an answer. does anyon know whats going on with the sliced, cooked beef, its normally prepackaged but can be in the bit where they slice it off a piece. thing is im very picky bout my meat and ill only buy beef like the above if it looks dry (never buy it in a packet), like a joint onedoes when you cook it at home. now some of these slices of beef are very "wet" and have "air bubbles". hopefully this makes sense, just wondering what it is? has it had water injected into it or somethin? cheers

i put a post up a few weeks ago on here about it, only one guy said he had it and it was ok, ive dediced not to shell out the 1.79 for it cos im tight!

just reading that, i wondered why the stop/bar button wasnt pressed, then realised after the initial end of the rope had gone in would it of wrapped round the flywheel, which wouldnt of stopped rotating?anyone had a rope go through, what happens?

i saw this and thought the same about the chip box.

the hopper is about the same height as usual its just hinged up.

after spending many an hour towing towalongs behind my 90 and getting stuck, i think it has some uses tho they are limited.

dont kinow about the twisted part, but im pretty sure all gaffs are steel its the main "frame" thats alloy, carbon etc

You seen my harness, get one of them. Skylotech

you dont need back support ben, you dont work hard enough:001_tt2:

Tightar

haha you know me well!

davey, so whats the crack does it just show it smaller, or without the ads etc?

think someone doesnt know the difference between an inch and a foot!!

saw this near where ive been working recently, just shows the sopciety we live in.

guessing you mean tapatalk so you can view the forum better on the iphone?

 

been wondering the same thing tbh

yeah thats the one, everytime i come n here it flashes up about it,its the only forum i use that does tho. but its not cheap if its crap!

Anyone use the iPhone native app? Is it worth it for 1.79? Cheers guys

but jo-beau seem to be changing hands alot if u want to play it safe (ie spares,and need help maitaining ur machine then i would go for a greenmech)

ive just bought a 300 and had thought the same, but realistically what is going to be unique to it? bearings, belts and anything engine wise will all be easily obtainable from engineering places etc. the only real thing i can see is blades and anvil but saturn do new blades. saying that i might be missing something?

weve just been going through this at work, i thought it was a requirment too, for a three point chin strap. cant see the elstic type husky ones been muh good in a fall?

just athought but have you tried a different nfu office?

dont think its possible unless you have an old tank at home as there needs to be a take off point on the bottom of the tank to get the liquid. if you do you can buy both hand and electric pumps to transfer it. wouldnt worry bout customs its not like they can dip the tank!!

faling that unless youve got a lpg garage close by i wouldnt bother its a bit of a ball ache when theres one close by!

I'm interested where is it and how much? Cheers mike

Cheers for the replies. Just got to find someone to sell/give me some scaffold now.

sorry forgot too add that, im after putting logs on it. so if its about 200kg per length and there'll be three lengths with boarding over them im looking at about half a ton ish. ok cheers guys. i might have to think about putting legs in the middle to increase it.

ok im making a shelf in my lockup, its gonna be about 6ft tall, 8'2 wide and about 10ft long. so im thinking of 6 legs, 3x10ft lengths and 3x8'2 lengths if that makes sense.but i dont want legs down the middle only around the side, so the spans will be as abhove 10ft and 8'2. hope that makes sense im crap at explaining this sort of thing. cheers mike

errr don tknow yet, whats the difference? itll be the galved stuff not the old ungalved stuff, other than that dont know. is there much difference, im just after a rough guide

im after the maximum weight steel scaff poles can take. either on a per metre or whatever. basically i want to see how much an 8'2" length of bar can safely take? cheers mike

yeah id be interested too if numbers need making up. let us know cheers

i only saw the hand tools part when i put my last post up, i mainly want it for the chipper as its not quite as secure as id like! its only a jb chipper hence £4k.

This covers loss or damage to powered and non-powered hand held tools of all types belonging to, leased to, on hire purchase, loan or hired to you or you employees

We will not pay for personal tools whilst unattended unless they are contained in:

a) a vehicle provided that the doors of the vehicle are locked and all its windows and other openings are fully closed and properly fastened or,

b) a locked building or lock storage unit.

thats about all i can find, although it only covers hand tools so ill have to ring regarding the chipper

hi guys can anyone reccomend tool only insurance? ive found a company online called tool insurance online who quoted 105 fo £4000 of tools, sounds too cheap or is it? cheers

Beggers can't be choosers! Pm me your postcode an I'll have a look cheers rob.