Jump to content

Log in or register to remove this advert

Recommended Posts

Posted
Some Nice kit you have there wooded . how much timber does the trailer and botex carry ?

 

If it helps any, we've just had a few loads go over the weighbridge on a similar Botex trailer (11T Euro trailer with standard height pins) and got around 7T of 3.75m Pine Sawlogs and around 6T of 3.75 Pine Chip

Log in or register to remove this advert

Posted
Had the small seppi flail out mulching undergrowth on a fairly steep site last and this week, tried to get the trees upright In the photo! :001_smile:

 

nice one (jerry or andrew?)

we need more usefull kit like that...

Posted (edited)

jerry harpers (arbwork's) valtra t190 and his hiezohack in for us last week and this week.

016.jpg.ce1c32a1740312980a75fb33fb1488fc.jpg

014.jpg.e8aa14095c0ff0c304b51122ef2e0315.jpg

006.jpg.5e010b3a39199a5cefdbe1372e730a9d.jpg

005.jpg.5d3c40ac66be99c2d7bfa29ea54004bb.jpg

004.jpg.b57e82a7045d9a8ffbc17639829abc06.jpg

Edited by WoodED
Posted
This our baby tractor with improvised cherry picker for doing the farm hedges, it seems a bit inadequate compared with most here but it does what we need.

 

If nothing else, just makes sure its well tied on to the forks and the forks can't release in this position. I know someone who had a similar arrangement and got tipped out and then had the crate land on top of them..

Posted (edited)
If nothing else, just makes sure its well tied on to the forks and the forks can't release in this position. I know someone who had a similar arrangement and got tipped out and then had the crate land on top of them..

 

Thanks for the concern, that accident sounds nasty but the crate is heavily strapped to the forks carrier and securing pins fitted to fork carrier to secure tines on.

 

Nice pictures WoodEd

You have kit I can only dream about. Mind you we would have to open up every gateway on the farm to get that kit in and out.

Edited by Woodworks
Posted
Thanks for the concern, that accident sounds nasty but the crate is heavily strapped to the forks carrier and securing pins fitted to fork carrier to secure tines on.

 

Nice pictures WoodEd

You have kit I can only dream about. Mind you we would have to open up every gateway on the farm to get that kit in and out.

 

thanks mate.. its not all ours.. the tractor with the heizohack on the back belongs to 'arbwork' on here

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.