Tiny echo!

[TGB]

How does the 2511 differ from the 2510?

[Joe Newton]

It doesn't catch fire

[Joe Newton]

Rob, any news on the new echo?

 

High clip point? Possibility of an 8" sprocket nose bar?

[dan494]

Rob, any news on the new echo?

 

High clip point? Possibility of an 8" sprocket nose bar?

 

 

They're identical to the 2510. If you look at the German echo site via Google translate you can see it listed there

 

 

Sent from my iPhone using Arbtalk

[Maxnaggle]

Any news yet???? i cant handle the tension anymore !

[Rob D]

Rob, any news on the new echo?

 

High clip point? Possibility of an 8" sprocket nose bar?

 

 

 

 

I doubt it on either - someone called Charlie got a display one from the APF and it is pretty much the same saw but a bit wider.

 

 

We have 10" Sugi bar/chain combos here GROUP 0 Echo chainsaws Archives - Sugihara Guide Bars

 

 

 

 

No one seems to know what bar and chain it will come with - and it's pretty hard going trying to get info out of the importers!

 

 

Will e-mail them again today....

[Mark_Skyland]

I "presume" it will be the 1/4" as that is what all the last 2510's where. Will hopefully find out soon!

[Rob D]

I "presume" it will be the 1/4" as that is what all the last 2510's where. Will hopefully find out soon!

 

 

But will it be the 1/4 .043 or 1/4 .050?

 

 

 

 

I've rung them to find out and hopefully it'll be the .043 option..

[dan494]

I "presume" it will be the 1/4" as that is what all the last 2510's where. Will hopefully find out soon!

 

 

Just a thought, if I got the replacement 2511 and kept the 280 but didn't have a bar and chain with the new saw would there be a discount on the £120 that I could put towards the sugihara bar from rob instead? Unless you could supply them from rob as part of your sugihara range?

 

 

Sent from my iPhone using Arbtalk

[Mark_Skyland]

But will it be the 1/4 .043 or 1/4 .050?

 

 

 

 

I've rung them to find out and hopefully it'll be the .043 option..

 

I would have thought they would just use an oregon chain and I didnt think there was that option with oregon. Be interesting but i'll guess its the 0.50 as I would imagine they had a lot of bars and chains stocked up for the 2510 and would doubt they want to loose any more money than they already have.

 

Just a thought, if I got the replacement 2511 and kept the 280 but didn't have a bar and chain with the new saw would there be a discount on the £120 that I could put towards the sugihara bar from rob instead? Unless you could supply them from rob as part of your sugihara range?

 

 

Sent from my iPhone using Arbtalk

 

I will be able to sort something out.